Simplifying complexity: Mixture toxicity assessment in the last 20 years
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Chemical monitoring provides ample evidence that organisms in their environment are exposed to complex cocktails of contaminants rather than individual chemicals. Thus, the challenge emerges on how to assess potential combined effects of such mixture exposures. The body of toxicological and ecotoxicologcial literature in the 90s suggested that combined effects of toxicological significance may indeed be caused in humans and the environment by an exposure to chemical mixtures. Furthermore, abundant statements seemed to agree that synergy was a major problem for environmental risk assessment. At the same time it was clear that an assessment of synergies based on the experimental testing of all possible mixtures occurring or anticipated in the environment was not a viable option for risk assessment. Moreover, existing uncertainty factors in chemical risk assessment are not intended to account for mixture effects, and formulating additional factors that would ensure the desired level of protection could not be based on any evidence. Therefore, it seemed as if chemical risk assessment was stuck in a deadlock without any management option, and revisiting component-based methodologies for assessing combined effects appeared as the most promising approach. The empirical evidence of the time was derived mainly from studies of binary pesticide mixtures in short-term aquatic toxicity assays, which were analyzed by a plethora of different and often conflicting approaches. The confusion in terminology, methods, and conceptual premises reached almost Babylonian proportions, which lead to the widespread perception of unpredictability as the dominating feature of mixture (eco)toxicology. The various mathematical models and tools available fostered the assessment of combined effects without explicitly formulating the underlying, often fundamentally different assumptions of the different approaches. Furthermore, these assumptions were all too often not translated into consistent guidelines for the experimentalist, and descriptive tools seemed all too simplistic for a sound mixture toxicity assessment. Synergism was a commonly used termed for describing the toxicity of a mixture. However, it was often overlooked that, as any other assessment term, synergism is a comparative statement, as it describes a mixture toxicity that is substantially higher than expected. Its use, therefore, requires a definition of the expected response of a mixture. Only this allows an unambiguous use, by comparing experimental observations with the expected response. The fundamental question of whether knowledge of the individual toxicities of the mixture components would allow the prediction of their combined effect, therefore, remained largely unanswered. This started to change with a series of pioneering studies by Hermens and coworkers 1, which showed that the simple assumption of concentration addition provided quantitatively reasonable expectations for joint toxic effects of multiple mixtures of nonpolar, nonreactive organic compounds. For human-oriented environmental risk assessment the debate in the United States at this time focused on a mode of action debate to identify compounds that acted similar and could possibly be assessed together based on the concentration addition (CA) principle (e.g., Mileson et al. 2). Also, a general belief was that determination of effect thresholds for individual chemicals was sufficiently protective for most mixtures 3. Efforts of identifying patterns of combined effects for different types of mixtures led to the idea of comparatively testing the predictive power of the general concepts of CA (also called dose addition or Loewe additivity) 4 and independent action (IA; also known as response addition, effect multiplication, or Bliss independence) 5, 6, instead of developing specific models. This strategy also allowed tackling the question of whether effect thresholds of individual mixture components were protective against combination effects. A series of studies was designed to test multi-component mixtures with well-known mechanisms and modes of action for their components to investigate the following: 1) reference mixtures composed of compounds with entirely similar and dissimilar action 7, 8; 2) mixtures with components in concentrations at and below statistically significant effects 9; and 3) 2 different biological systems (bacteria and algae) to provide a proof of principle 7, 9. As a prerequisite to meet the goal of analyzing low effect concentrations in the mixture experiments rigorous concentration-response estimations were performed employing a so-called “best fit modeling,” based on the simultaneous application of different nonlinear concentration-effect regression models 10. The investigations demonstrated a surprisingly consistent overlap between observed and expected combination effects, as predicted from the information on the individual toxicities, the molar fractions of the components, and t
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ankley, G. T., Bennett, R. S., Erickson, R. J., Hoff, D. J., Hornung, M. W., Johnson, R. D., Mount, D. R., Nichols, J. W., Russom, C. L., Schmieder, P. K., et al. (2009) · Environmental Toxicology and Chemistry · doi:10.1002/etc.34 · Cited by 2,734
THE TOXICITY OF POISONS APPLIED JOINTLY1
BLISS, C. I. (1939) · Annals of Applied Biology · doi:10.1111/j.1744-7348.1939.tb06990.x · Cited by 2,419
Risk assessment of combined exposure to multiple chemicals: A WHO/IPCS framework
(2011) · Regulatory Toxicology and Pharmacology · doi:10.1016/j.yrtph.2011.03.010 · Cited by 358
Cited by
A review of toxicity and mechanisms of individual and mixtures of heavy metals in the environment
Wu, X., Cobbina, S. J., Mao, G., Xu, H., Zhang, Z., & Yang, L. (2016) · Environmental Science and Pollution Research · doi:10.1007/s11356-016-6333-x · Cited by 1,078
The role of multiple global change factors in driving soil functions and microbial biodiversity
Rillig, M. C., Ryo, M., Lehmann, A., Aguilar-Trigueros, C. A., Buchert, S., Wulf, A., Iwasaki, A., Roy, J., & Yang, G. (2019) · Science · doi:10.1126/science.aay2832 · Cited by 902
Herrmann, A. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60336a · Cited by 351
Environmental Side Effects of Pharmaceutical Cocktails: What We Know and What We Should Know
Vasquez, M. I., Lambrianides, A., Schneider, M., Kümmerer, K., & Fatta-Kassinos, D. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.06.069 · Cited by 295
“[110], discuss also this issue.”
Considerations for toxicity experiments and risk assessments with PFAS mixtures
McCarthy, C. J., Roark, S. A., & Middleton, E. T. (2021) · Integrated Environmental Assessment and Management · doi:10.1002/ieam.4415 · Cited by 46
Metadata
- Authors
- Altenburger, R., Backhaus, T., Boedeker, W., Faust, M., & Scholze, M.
- Venue
- Environmental Toxicology and Chemistry
- Publisher
- Oxford University Press (OUP)
- Published
- 2013-08-01
- Volume
- 32
- Issue
- 8
- Pages
- 1685-1687
- ISSN
- 0730-7268 (ISSN-L)
- 1552-8618
- OpenAlex
- W2157249292
- Cited by
- 147
- References
- 3
- FWCI
- 6.45
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.