The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Behavior of combined fly ash/slag‐based geopolymers when exposed to high temperatures
Abstract
The high temperature performance up to 800∘C of combined fly ash (FA) and slag geopolymers at the ratio of 100, 65/35, 50/50, 35/65 and 100% (wt‐%) is presented in this paper. Geopolymers are alternative novel binders to conventional Portland cement and are generally believed to provide superior fire resistant properties due to their ceramic‐like characteristics. This paper presents new data on the behavior of geopolymers made with combined FA/slag mentioned previously, which were mixed with alkaline materials with molecular silicate modulus (Ms=SiO 2/Na 2 O) of 0, 0.5, 1.0, 1.5 and 2.0 with sodium (Na) dosages of 4 and 8 (wt‐%). Altogether 60 mixes were made yielding compressive strengths between 3 and 83 MPa. Behavior of the material to high temperatures was investigated by exposing the specimens to 800∘C and testing for compressive strengths. It was found that as the initial strength increases, the residual strength exponentially decreased. The compressive stress versus strain relationships showed that the ductility of the specimens decreased as the initial strength increased. The ability of the materials with high ductility (i.e. less brittleness) to accommodate thermal incompatibilities arising from uneven temperatures arising during heating is concluded to be the major factor contributing to the reduced strength losses. Copyright © 2009 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Green house gas emissions due to concrete manufacture
Flower, D. J. M., & Sanjayan, J. G. (2007) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2007.05.327 · Cited by 912
Self-citation
Cited by
Fly ash-based geopolymer: clean production, properties and applications
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.019 · Cited by 1,020
Nath, P., & Sarker, P. K. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.11.034 · Cited by 574
Mechanical properties of alkali-activated concrete: A state-of-the-art review
Ding, Y., Dai, J.-G., & Shi, C.-J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.121 · Cited by 448
Abdalqader, A. F., Jin, F., & Al-Tabbaa, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.010 · Cited by 444
A critical review of geopolymer properties for structural fire-resistance applications
Lahoti, M., Tan, K. H., & Yang, E.-H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.06.076 · Cited by 431
Metadata
- Authors
- Guerrieri, M., & Sanjayan, J. G.
- Venue
- Fire and Materials
- Publisher
- Wiley
- Published
- 2009-07-06
- Volume
- 34
- Issue
- 4
- Pages
- 163-175
- ISSN
- 0308-0501 (ISSN-L)
- 1099-1018
- OpenAlex
- W2064440500
- Cited by
- 168
- References
- 1
- FWCI
- 8.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Behavior of combined fly ash/slag‐based geopolymers when exposed to high temperatures. https://app.cochat.ai/papers/10.1002/fam.1014
- The paper
- Guerrieri, M., & Sanjayan, J. G. (2010). Behavior of combined fly ash/slag‐based geopolymers when exposed to high temperatures. Fire and Materials. https://doi.org/10.1002/fam.1014
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.