Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 254

The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.

A simple SPH algorithm for multi‐fluid flow with high density ratios

Monaghan, J. J., Rafiee, Ashkan·2013·International Journal for Numerical Methods in Fluids

Abstract

SUMMARY: In this paper, we describe an SPH algorithm for multi‐fluid flow, which is efficient, simple and robust. We derive the inviscid equations of motion from a Lagrangian together with the constraint provided by the continuity equation. The viscous flow equations then follow by adding a viscous term. Rigid boundaries are simulated using boundary force particles in a manner similar to the immersed boundary method. Each fluid is approximated as weakly compressible with a speed of sound sufficiently large to guarantee that the relative density variations are typically 1%. When the SPH force interaction is between two particles of different fluids, we increase the pressure terms. This simple procedure stabilizes the interface between the fluids. The equations of motion are integrated using a time stepping rule based on a second‐order symplectic integrator. When linear and angular momentum should be conserved exactly, they are conserved to within round‐off errors. We test the algorithm by simulating a variety of problems involving fluids with a density ratio in the range 1–1000. The first of these is a free surface problem with no rigid boundaries. It involves the flow of an elliptical distribution with one fluid inside the other. We show that the simulations converge as the particle spacing decreases, and the results are in good agreement with the exact inviscid, incompressible theory. The second test is similar to the first but involves the nonlinear oscillation of the fluids. As in the first test, the agreement with theory is very good, and the method converges. The third test is the simulation of waves at the interface between two fluids. The method is shown to converge, and the agreement with theory is satisfactory. The fourth test is the Rayleigh–Taylor instability for a configuration considered by other authors. Key parameters are shown to converge, and the agreement with other authors is good. The fifth and final test is how well the SPH method simulates gravity currents with density ratios in the range 2–30. The results of these simulations are in very good agreement with those of other authors and in satisfactory agreement with experimental results.Copyright © 2012 John Wiley & Sons, Ltd.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/fld.3671

Cites

16 of 16 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Metadata

Authors
Monaghan, J. J., & Rafiee, A.
Venue
International Journal for Numerical Methods in Fluids
Publisher
Wiley
Published
2012-03-29
Volume
71
Issue
5
Pages
537-561
ISSN
  • 0271-2091 (ISSN-L)
  • 1097-0363
OpenAlex
W2097695735
Cited by
254
References
16
FWCI
9.53
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.