The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Radiation Grafted Membranes for Polymer Electrolyte Fuel Cells
Abstract
The cost of polymer electrolyte fuel cell (PEFC) components is crucial to the commercial viability of the technology. Proton exchange membranes fabricated via the method of radiation grafting offer a cost‐competitive option, because starting materials are inexpensive commodity products and the preparation procedure is based on established industrial processes. Radiation grafted membranes have been used with commercial success in membrane separation technology. This review focuses on the application of radiation grafted membranes in fuel cells, in particular the identification of fuel cell relevant membrane properties, aspects of membrane electrode assembly (MEA) fabrication, electrochemical performance and durability obtained in cell or stack tests, and investigation of failure modes and post mortem analysis. The application in hydrogen and methanol fuelled cells is treated separately. Optimized styrene / crosslinker grafted and sulfonated membranes show performance comparable to perfluorinated membranes. Some properties, such as methanol permeability, can be tailored to be superior. Durability of several thousand hours at practical operating conditions has been demonstrated. Alternative styrene derived monomers with higher chemical stability offer the prospect of enhanced durability or higher operating temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells
Kreuer, K. D. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00632-3 · Cited by 2,969
Electroosmotic drag in polymer electrolyte membranes: an electrophoretic NMR study
Ise, M., Kreuer, K. D., & Maier, J. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(99)00178-2 · Cited by 235
Cited by
Scientific Aspects of Polymer Electrolyte Fuel Cell Durability and Degradation
Borup, R., Meyers, J., Pivovar, B., Kim, Y. S., Mukundan, R., Garland, N., Myers, D., Wilson, M., Garzon, F., Wood, D., et al. (2007) · Chemical Reviews · doi:10.1021/cr050182l · Cited by 3,402
A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies
Wu, J., Yuan, X. Z., Martin, J. J., Wang, H., Zhang, J., Shen, J., Wu, S., & Merida, W. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.06.006 · Cited by 1,587
Review of Advanced Materials for Proton Exchange Membrane Fuel Cells
Kraytsberg, A., & Ein-Eli, Y. (2014) · Energy & Fuels · doi:10.1021/ef501977k · Cited by 705
Polymeric materials as anion-exchange membranes for alkaline fuel cells
Couture, G., Alaaeddine, A., Boschet, F., & Ameduri, B. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.04.004 · Cited by 685
Polymerization Reactions and Modifications of Polymers by Ionizing Radiation
Ashfaq, A., Clochard, M.-C., Coqueret, X., Dispenza, C., Driscoll, M. S., Ulański, P., & Al-Sheikhly, M. (2020) · Polymers · doi:10.3390/polym12122877 · Cited by 459
Metadata
- Authors
- Gubler, L., Gürsel, S. A., & Scherer, G. G.
- Venue
- Fuel Cells
- Publisher
- Wiley
- Published
- 2005-08
- Volume
- 5
- Issue
- 3
- Pages
- 317-335
- ISSN
- 1615-6846 (ISSN-L)
- 1615-6854
- OpenAlex
- W2021369259
- Cited by
- 233
- References
- 2
- FWCI
- 17.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.