Graphene and Functionalized Graphene Supported Platinum Catalyst for PEMFC
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The graphene was synthesized by chemical oxidation followed by thermal exfoliation of natural graphite. The functionalized graphene (FG) was prepared by chemical treatment of the synthesized graphene. The as‐synthesized graphene and FG were characterized and used as Pt support materials. The 20 wt.% Pt/G and 20 wt.% Pt/FG catalysts were prepared by precipitation method. The prepared catalysts were characterized for particle size using X‐ray diffraction, surface morphology, electrochemical performance, and stability using cyclic voltammetry. The electrochemical surface area of the FG supported platinum catalyst was found to be more than 45% as compared to the commercial carbon supported platinum catalyst. The stability of the developed catalyst (Pt/G and Pt/FG) was significantly higher than the commercial Pt/C. The membrane electrode assembly was developed using the catalysts and tested in a PEMFC. The maximum power densities of the fuel cell were found to be 314, 426, and 455 mW cm–2 using Pt/C, Pt/G, and Pt/FG, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rao, C. V., Reddy, A. L. M., Ishikawa, Y., & Ajayan, P. M. (2011) · Carbon · doi:10.1016/j.carbon.2010.10.056 · Cited by 184
Cited by
Recent progress on graphene-based hybrid electrocatalysts
Xia, B., Yan, Y., Wang, X., & Lou, X. W. (. (2014) · Mater. Horiz. · doi:10.1039/c4mh00040d · Cited by 331
Vinothkannan, M., Kim, A. R., Gnana kumar, G., & Yoo, D. J. (2018) · RSC Advances · doi:10.1039/c7ra12768e · Cited by 267
Lee, J. H., Doo, G., Kwon, S. H., Kang, H., Choi, S., Yim, S.-D., Kim, H.-T., & Lee, S. G. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00042 · Cited by 27
Highly purified CNTs: an exceedingly efficient catalyst support for PEM fuel cell
Gupta, C., Maheshwari, P. H., Sachdev, D., Sahu, A. K., & Dhakate, S. R. (2016) · RSC Advances · doi:10.1039/c5ra28029j · Cited by 19
Metadata
- Authors
- Ghosh, A., Basu, S., & Verma, A.
- Venue
- Fuel Cells
- Publisher
- Wiley
- Published
- 2013-04-30
- Volume
- 13
- Issue
- 3
- Pages
- 355-363
- ISSN
- 1615-6846 (ISSN-L)
- 1615-6854
- OpenAlex
- W2018220039
- Cited by
- 70
- References
- 1
- FWCI
- 2.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.