CoChat

New Insights into the Application of Lithium-Ion Battery Materials: Selective Extraction of Lithium from Brines via a Rocking-Chair Lithium-Ion Battery System

Open access

The DOI matches its Crossref record; 24 of the 25 references it cites were found in a registry or an index.

Abstract

Lithium extraction from high Mg/Li ratio brine is a key technical problem in the world. Based on the principle of rocking‐chair lithium‐ion batteries, cathode material LiFePO 4 is applied to extract lithium from brine, and a novel lithium‐ion battery system of LiFePO 4 | NaCl solution | anion‐exchange membrane | brine | FePO 4 is constructed. In this method, Li+ is selectively absorbed from the brine by FePO 4 (Li+ + e + FePO 4 = LiFePO 4); meanwhile, Li+ is desorbed from LiFePO 4 (LiFePO 4 − e = Li+ + FePO 4) and enriched efficiently. To treat a raw brine solution, the Mg/Li ratio decreases from the initial 134.4 in the brine to 1.2 in the obtained anolyte and 83% lithium is extracted. For the treatment of an old brine solution, the Mg/Li ratio decreases from the initial 48.4 in the brine to 0.5 and the concentration of lithium in the anolyte is accumulated about six times (from the initial 0.51 g L−1 in the brine to 3.2 g L−1 in the anolyte), with the absorption capacity of about 25 mg (Li) g (LiFePO 4)−1. Additionally, it displays a great perspective on the application in light of its high selectively, good cycling performance, effective lithium enrichment, environmental friendliness, low cost, and avoidance of poisonous organic reagents and harmful acid or oxidant.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/gch2.201700079

Cites

24 of 24 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 The intercalation potential of some electrode materials that can be used for aqueous lithium‐ion batteries. Left: O2/H2 evolution potential versus normal hydrogen electrode (NHE) for different pH in 1 mol L−1 Li2SO4 aqueous solution. Right: Lithium‐ion intercalation potential of various electrode materials versus NHE and Li/Li+. From Luo et al.13
Figure 1 The intercalation potential of some electrode materials that can be used for aqueous lithium‐ion batteries. Left: O2/H2 evolution potential versus normal hydrogen electrode (NHE) for different pH in 1 mol L−1 Li2SO4 aqueous solution. Right: Lithium‐ion intercalation potential of various electrode materials versus NHE and Li/Li+. From Luo et al.13CC BY · PubMed Central
Figure 2 Structure of the electrolytic cell for lithium extraction.
Figure 2 Structure of the electrolytic cell for lithium extraction.CC BY · PubMed Central
Figure 3 Cyclic voltammograms of LiFePO4 in a) 0.5 mol L−1 LiCl, b) 0.5 mol L−1 NaCl, c) 0.5 mol L−1 KCl, and d) 0.5 mol L−1 MgCl2 solutions.
Figure 3 Cyclic voltammograms of LiFePO4 in a) 0.5 mol L−1 LiCl, b) 0.5 mol L−1 NaCl, c) 0.5 mol L−1 KCl, and d) 0.5 mol L−1 MgCl2 solutions.CC BY · PubMed Central
Figure 4 Chronopotentiometric curves of the deintercalation and intercalation of Li+, Na+, K+, and Mg2+ ions into/from FePO4/LiFePO4. a) Cathodic intercalation chronopotentiometric curves; b) Anodic deintercalation chronopotentiometric curves. The current density is 0.2 mA cm−2, and the concentration of LiCl, NaCl, KCl, and MgCl2 solution is 1.0 mol L−1.
Figure 4 Chronopotentiometric curves of the deintercalation and intercalation of Li+, Na+, K+, and Mg2+ ions into/from FePO4/LiFePO4. a) Cathodic intercalation chronopotentiometric curves; b) Anodic deintercalation chronopotentiometric curves. The current density is 0.2 mA cm−2, and the concentration of LiCl, NaCl, KCl, and MgCl2 solution is 1.0 mol L−1.CC BY · PubMed Central
Figure 5 a) Lithium recovery and Mg/Li mass ratio of the anolyte; b) Current density for each cycle.
Figure 5 a) Lithium recovery and Mg/Li mass ratio of the anolyte; b) Current density for each cycle.CC BY · PubMed Central
Figure 6 a) Membrane‐stacked electrolytic bath and b) its performance for lithium extraction from the old brine solution (Li 0.51 g L−1, Mg 24.7 g L−1, K 5.4 g L−1, Na 54.6 g L−1, Mg/Li = 48.4).
Figure 6 a) Membrane‐stacked electrolytic bath and b) its performance for lithium extraction from the old brine solution (Li 0.51 g L−1, Mg 24.7 g L−1, K 5.4 g L−1, Na 54.6 g L−1, Mg/Li = 48.4).CC BY · PubMed Central
Figure 7 Cycling performance of the electrolytic cell for lithium extraction in a mixed electrolyte of Li+ 2 g L−1, Mg2+ 40 g L−1, NaCl 116 g L−1.
Figure 7 Cycling performance of the electrolytic cell for lithium extraction in a mixed electrolyte of Li+ 2 g L−1, Mg2+ 40 g L−1, NaCl 116 g L−1.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 24 references

Research works printed but not linked: 2

  1. Anderson E. R., 2011, TRU Group, Presentation to 3rd Lithium Supply and Markets Conf.
  2. Zhu H., 2013, Sci. Rep., 3

Cited by

Metadata

Authors
He, L., Xu, W., Song, Y., Luo, Y., Liu, X., & Zhao, Z.
Affiliations
Central South University (CN)
Corresponding author
Zhao, Zhongwei
Venue
Global Challenges
Publisher
Wiley
Published
2018-01-15
Volume
2
Issue
2
Pages
1700079-1700079
ISSN
2056-6646 (ISSN-L)
OpenAlex
W2783780084
Cited by
113
References
25
Citations by year
2026: 8 · 2025: 20 · 2024: 21 · 2023: 16 · 2022: 14 · 2021: 12 · 2020: 10 · 2019: 9 · 2018: 3
FWCI
5.43
Type
journal article
Language
en
Open access
Locations
  • Global Challenges (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Funders
National Natural Science Foundation of China (51604160, U1407137)
Topics
  • Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane-based Ion Separation Techniques
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
Keywords
lithium recovery, lithium brines, LiFePO4 cathode, anion exchange membranes, lithium enrichment, lithium-ion battery materials

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.