Optimization of antigorite heat pre‐treatment via kinetic modeling of the dehydroxylation reaction for CO2 mineralization
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
This contribution describes a predictive framework expedient to the thermal processing of serpentinites for the mineralization of CO 2. We demonstrate the optimization of heat treatment of antigorite, providing a benchmark of an extreme case of activation among serpentine minerals. Antigorite was investigated non‐isothermally via thermogravimetry‐mass spectrometry and in situ X‐ray powder diffraction, its thermal reaction sequence elucidated, and reaction kinetics subsequently modeled. Based on the thermally induced structural changes, preferred content of residual hydroxyls in the dehydroxylated antigorite amounts to 10–40% of those present initially. This degree of dehydroxylation minimized the transformation of antigorite into new crystalline phases maximizing the amorphization of the new structure. The thermal reaction sequence provided both the explanation for the observed kinetic behavior and the basis for this optimization strategy. The optimal time for heat activation corresponds to ≤30 min, including the heat‐up period at a rate of 30 °C min–1 and an isothermal stage at 730 °C. This was successfully modeled using a three‐dimensional phase boundary reaction model (R3), with activation energy Ea of 160 kJ mol–1 and a frequency factor A of 5.7 ± 4.1 × 10 5 s–1 (5.7 × 10 5 s–1 for dynamic and 1.6 × 10 5 s–1 for static stage). This strategy translates to a fast and efficient thermal processing in an optimally sized calcining vessel. Furthermore, these results imply that activation of the more common serpentine minerals lizardite and chrysotile would be significantly faster as their dehydroxylation proceeds at lower temperatures than that of antigorite. © 2011 Society of Chemical Industry and John Wiley & Sons, Ltd
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ex situ aqueous mineral carbonation
Gerdemann, S. J., O'Connor, W. K., Dahlin, D. C., Penner, L. R., & Rush, H. (2007) · Environmental Science & Technology · doi:10.1021/es0619253 · Cited by 633
CO2 mineral sequestration: developments toward large‐scale application
Zevenhoven, R., Fagerlund, J., & Songok, J. K. (2011) · Greenhouse Gases: Science and Technology · doi:10.1002/ghg3.7 · Cited by 143
Exploration of the role of heat activation in enhancing serpentine carbon sequestration reactions
McKelvy, M. J., Chizmeshya, A. V. G., Diefenbacher, J., Béarat, H., & Wolf, G. (2004) · Environmental Science & Technology · doi:10.1021/es049473m · Cited by 140
Cited by
An Overview of the Status and Challenges of CO2 Storage in Minerals and Geological Formations
Kelemen, P., Benson, S. M., Pilorgé, H., Psarras, P., & Wilcox, J. (2019) · Frontiers in Climate · doi:10.3389/fclim.2019.00009 · Cited by 587
“Serpentine-rich mine tailings are an intriguing option as the carbonation of asbestiform chrysotile would mitigate health and environmental hazards, and products of rapid heat-treatment of serpentine-rich mine tailings could be used as a feedstock for carbon mineralization using concentrated sources of CO2 (McKelvy et…”
BackgroundKelemen, P. B., McQueen, N., Wilcox, J., Renforth, P., Dipple, G., & Vankeuren, A. P. (2020) · Chemical Geology · doi:10.1016/j.chemgeo.2020.119628 · Cited by 258
“In addition, the first calcining step would modify serpentine via “dehydroxylation”, creating a material that combines rapidly with CO2 to form magnesite, as documented in a large number of studies (Balucan and Dlugogorski, 2013; Balucan et al., 2011; Dlugogorski and Balucan, 2014; Fedoročková et al., 2012; Ghoorah et…”
BackgroundCO2 Mineralization—Bridge Between Storage and Utilization of CO2
Geerlings, H., & Zevenhoven, R. (2013) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-062011-080951 · Cited by 93
Rim, G., Marchese, A. K., Stallworth, P., Greenbaum, S. G., & Park, A.-H. A. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125204 · Cited by 72
Zeolite and Silica-based CO2 Adsorbents
Laugel, G., Bingre, R., & Louis, B. (2018) · Post-combustion Carbon Dioxide Capture Materials · doi:10.1039/9781788013352-00076 · Cited by 2
Metadata
- Authors
- Balucan, R. D., Kennedy, E. M., Mackie, J. F., & Dlugogorski, B. Z.
- Venue
- Greenhouse Gases: Science and Technology
- Publisher
- Wiley
- Published
- 2011-09-30
- Volume
- 1
- Issue
- 4
- Pages
- 294-304
- ISSN
- 2152-3878 (ISSN-L)
- OpenAlex
- W2073738460
- Cited by
- 31
- References
- 3
- FWCI
- 2.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimization of antigorite heat pre‐treatment via kinetic modeling of the dehydroxylation reaction for CO2 mineralization. https://app.cochat.ai/papers/10.1002/ghg.33
- The paper
- Balucan, R. D., Kennedy, E. M., Mackie, J. F., & Dlugogorski, B. Z. (2011). Optimization of antigorite heat pre‐treatment via kinetic modeling of the dehydroxylation reaction for CO2 mineralization. Greenhouse Gases: Science and Technology. https://doi.org/10.1002/ghg.33
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.