The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Spatial delineation of soil erosion vulnerability in the Lake Tana Basin, Ethiopia
Abstract
The main objective of this study was to identify the most vulnerable areas to soil erosion in the Lake Tana Basin, Blue Nile, Ethiopia using the Soil and Water Assessment Tool (SWAT), a physically based distributed hydrological model, and a Geographic Information System based decision support system that uses multi‐criteria evaluation (MCE). The SWAT model was used to estimate the sediment yield within each sub‐basin and identify the most sediment contributing areas in the basin. Using the MCE analysis, an attempt was made to combine a set of factors (land use, soil, slope and river layers) to make a decision according to the stated objective. On the basis of simulated SWAT, sediment yields greater than 30 tons/ha for each of the sub‐basin area, 18·4% of the watershed was determined to be high erosion potential area. The MCE results indicated that 12–30·5% of the watershed is high erosion potential area. Both approaches show comparable watershed area with high soil erosion susceptibility. The output of this research can aid policy and decision makers in determining the soil erosion ‘hot spots’ and the relevant soil and water conservation measures. Copyright © 2009 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Model Evaluation Guidelines for Systematic Quantification of Accuracy in Watershed Simulations
Moriasi, D. N., Arnold, J. G., Liew, M. W. V., Bingner, R. L., Harmel, R. D., & Veith, T. L. (2007) · Transactions of the ASABE · doi:10.13031/2013.23153 · Cited by 13,446
LARGE AREA HYDROLOGIC MODELING AND ASSESSMENT PART I: MODEL DEVELOPMENT 1
Arnold, J. G., Srinivasan, R., Muttiah, R. S., & Williams, J. R. (1998) · JAWRA Journal of the American Water Resources Association · doi:10.1111/j.1752-1688.1998.tb05961.x · Cited by 7,945
Self-citationGassman, P. W., Reyes, M. R., Green, C. H., & Arnold, J. G. (2007) · Transactions of the ASABE · doi:10.13031/2013.23637 · Cited by 3,040
Estimating Uncertain Flow and Transport Parameters Using a Sequential Uncertainty Fitting Procedure
Abbaspour, K. C., Johnson, C. A., & van Genuchten, M. T. (2004) · Vadose Zone Journal · doi:10.2136/vzj2004.1340 · Cited by 1,153
Cited by
Mango, L. M., Melesse, A. M., McClain, M. E., Gann, D., & Setegn, S. G. (2011) · Hydrology and Earth System Sciences · doi:10.5194/hess-15-2245-2011 · Cited by 473
Self-citationGashaw, T., Tulu, T., Argaw, M., & Worqlul, A. W. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2017.11.191 · Cited by 374
Giri, S. (2021) · Environmental Pollution · doi:10.1016/j.envpol.2020.116332 · Cited by 328
Woldesenbet, T. A., Elagib, N. A., Ribbe, L., & Heinrich, J. (2017) · Science of The Total Environment · doi:10.1016/j.scitotenv.2016.09.124 · Cited by 316
Physically based soil erosion and sediment yield models revisited
Pandey, A., Himanshu, S. K., Mishra, S. K., & Singh, V. P. (2016) · CATENA · doi:10.1016/j.catena.2016.08.002 · Cited by 291
Metadata
- Authors
- Setegn, S. G., Srinivasan, R., Dargahi, B., & Melesse, A. M.
- Venue
- Hydrological Processes
- Publisher
- Wiley
- Published
- 2009-10-21
- Volume
- 23
- Issue
- 26
- Pages
- 3738-3750
- ISSN
- 0885-6087 (ISSN-L)
- 1099-1085
- OpenAlex
- W2001634878
- Cited by
- 242
- References
- 4
- FWCI
- 8.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.