The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Preparation, characterization, and in vitro degradation of bioresorbable and bioactive composites based on Bioglass®‐filled polylactide foams
Abstract
Highly porous poly(D,L‐lactide)/Bioglass® composites scaffolds were prepared by thermally induced phase separation process of polymer solutions and subsequent solvent sublimation. A series of composite foams with different polymer/Bioglass® weight ratios was prepared to study the influence of Bioglass® content on the foam characteristics such as porous structure, density, and pore volume. The pore volume was decreased from 9.5 to 5.7 cm 3/g when the Bioglass® content was increased up to 40 wt %, but the overall pore morphology was not affected very much by changing the polymer/glass composition ratio. The composites foams were then incubated in phosphate‐buffered saline at 37°C to study the in vitro degradation of the polymer and to detect hydroxyapatite (HA) formation as an indication of their bioactivity. The addition of Bioglass® to polymer foams increased the water absorption and weight loss as compared with pure polymer foams. However, the polymer molecular weight, determined by size exclusion chromatography, was found to decrease more rapidly and to a larger extent in absence of Bioglass®. This delayed degradation rate in the composite foams was probably caused by the dissolution of alkaline ions from the Bioglass®, resulting in a buffering effect of the incubation medium. After incubation for 7 days, HA was detected by X‐ray diffractometry and Raman spectroscopy and confirmed by environmental scanning electron microscopy and energy‐dispersive X‐ray analysis. The porous composites developed here are promising materials for bone regeneration applications because the formation of HA on the surface of the pore walls should provide good environment for the adhesion and proliferation of osteoblasts and osteoprogenitor cells. © 2003 Wiley Periodicals, Inc. J Biomed Mater Res 66A: 335–346, 2003
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Cited by
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
Self-citationReview of bioactive glass: From Hench to hybrids
Jones, J. R. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.08.023 · Cited by 2,451
Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering
Gerhardt, L.-C., & Boccaccini, A. R. (2010) · Materials · doi:10.3390/ma3073867 · Cited by 1,179
Self-citationPolymeric materials for bone and cartilage repair
Puppi, D., Chiellini, F., Piras, A. M., & Chiellini, E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.006 · Cited by 913
Multifunctional nanostructured PLA materials for packaging and tissue engineering
Armentano, I., Bitinis, N., Fortunati, E., Mattioli, S., Rescignano, N., Verdejo, R., Lopez-Manchado, M. A., & Kenny, J. M. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.010 · Cited by 645
Metadata
- Authors
- Maquet, V., Boccaccini, A. R., Pravata, L., Notingher, I., & Jérôme, R.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2003-07-11
- Volume
- 66A
- Issue
- 2
- Pages
- 335-346
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2009793668
- Cited by
- 177
- References
- 1
- FWCI
- 6.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation, characterization, and in vitro degradation of bioresorbable and bioactive composites based on Bioglass®‐filled polylactide foams. https://app.cochat.ai/papers/10.1002/jbm.a.10587
- The paper
- Maquet, V., Boccaccini, A. R., Pravata, L., Notingher, I., & Jérôme, R. (2003). Preparation, characterization, and in vitro degradation of bioresorbable and bioactive composites based on Bioglass®‐filled polylactide foams. Journal of Biomedical Materials Research Part A. https://doi.org/10.1002/jbm.a.10587
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.