The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Removal of heavy metals and cyanide from gold mine wastewater
Abstract
This paper reviews the technology and biotechnology to remove heavy metals (such as copper, arsenic, lead and zinc) and cyanide from contaminated wastewater. The paper places special emphasis on gold mine wastewater and the use of low cost materials as sorbent. Various biological as well as physicochemical treatment processes are discussed and compared on the basis of costs, energy requirement, removal efficiency, limitations and advantages. Sorption using natural plant materials, industrial and agricultural waste has been demonstrated to have the potential to replace conventional methods for the removal of heavy metals because of its cost effectiveness, efficiency and the local availability of these materials as biosorbent. The parameters affecting sorption, such as initial ion concentration, pH, sorbent dosage, particle size and temperature, are discussed. The overall treatment cost of metal and cyanide contaminated wastewater depends on the process employed and the local conditions. In general, technical applicability, cost‐effectiveness and plant simplicity are the key factors in selecting the most suitable treatment method. Copyright © 2010 Society of Chemical Industry
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Physico–chemical treatment techniques for wastewater laden with heavy metals
Kurniawan, T. A., Chan, G. Y. S., Lo, W.-H., & Babel, S. (2006) · Chemical Engineering Journal · doi:10.1016/j.cej.2006.01.015 · Cited by 2,072
Gadd, G. M. (2009) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.1999 · Cited by 1,287
Adsorption of heavy metals on Na-montmorillonite. Effect of pH and organic substances
Abollino, O., Aceto, M., Malandrino, M., Sarzanini, C., & Mentasti, E. (2003) · Water Research · doi:10.1016/s0043-1354(02)00524-9 · Cited by 728
MALKOC, E., & NUHOGLU, Y. (2007) · Separation and Purification Technology · doi:10.1016/j.seppur.2006.09.017 · Cited by 318
Adsorption of Cu(II), Ni(II) and Zn(II) on modified jute fibres
Shukla, S. R., & Pai, R. S. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2004.12.010 · Cited by 287
Cited by
Electrodialysis desalination for water and wastewater: A review
Al-Amshawee, S., Yunus, M. Y. B. M., Azoddein, A. A. M., Hassell, D. G., Dakhil, I. H., & Hasan, H. A. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122231 · Cited by 964
Mani, D., & Kumar, C. (2014) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-013-0299-8 · Cited by 615
Campione, A., Gurreri, L., Ciofalo, M., Micale, G., Tamburini, A., & Cipollina, A. (2018) · Desalination · doi:10.1016/j.desal.2017.12.044 · Cited by 588
Malamis, S., & Katsou, E. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.03.024 · Cited by 548
Inorganic nano-adsorbents for the removal of heavy metals and arsenic: a review
Zito, P., & Shipley, H. J. (2015) · RSC Advances · doi:10.1039/c5ra02714d · Cited by 416
Metadata
- Authors
- Acheampong, M. A., Meulepas, R. J. W., & Lens, P. N. L.
- Venue
- Journal of Chemical Technology & Biotechnology
- Publisher
- Wiley
- Published
- 2010-02-23
- Volume
- 85
- Issue
- 5
- Pages
- 590-613
- ISSN
- 0142-0356 (ISSN-L)
- 0268-2575
- 1097-4660
- OpenAlex
- W1964173367
- Cited by
- 224
- References
- 5
- FWCI
- 9.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Removal of heavy metals and cyanide from gold mine wastewater. https://app.cochat.ai/papers/10.1002/jctb.2358
- The paper
- Acheampong, M. A., Meulepas, R. J. W., & Lens, P. N. L. (2010). Removal of heavy metals and cyanide from gold mine wastewater. Journal of Chemical Technology & Biotechnology. https://doi.org/10.1002/jctb.2358
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.