The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Controlled freezing and freeze drying: a versatile route for porous and micro‐/nano‐structured materials
Abstract
Freeze drying is a process whereby solutions are frozen in a cold bath and then the frozen solvents are removed via sublimation under vacuum, leading to formation of porous structures. Pore size, pore volume and pore morphology are dependent on variables such as freeze temperature, solution concentration, nature of solvent and solute, and the control of the freeze direction. Aqueous solutions, organic solutions, colloidal suspensions, and supercritical CO 2 solutions have been investigated to produce a wide range of porous and particulate structures. Emulsions have recently been employed in the freeze drying process, which can exert a systematic control on pore morphology and pore volume and can also lead to the preparation of organic micro‐ and nano‐particles. Spray freezing and directional freezing have been developed to form porous particles and aligned porous materials. This review describes the principles, latest progress and applications of materials prepared by controlled freezing and freeze drying. First of all the basics of freeze drying and the theory of freezing are discussed. Then the materials fabricated by controlled freezing and freeze drying are reviewed based on their morphologies: porous structures, microwires and nanowires, and microparticles and nanoparticles. The review concludes with new developments in this area and a brief look into the future. Copyright © 2010 Society of Chemical Industry
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
Freeze‐Casting of Porous Ceramics: A Review of Current Achievements and Issues
Deville, S. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700270 · Cited by 1,260
Preparation of aligned porous gelatin scaffolds by unidirectional freeze-drying method
Wu, X., Liu, Y., Li, X., Wen, P., Zhang, Y., Long, Y., Wang, X., Guo, Y., Xing, F., & Gao, J. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.041 · Cited by 457
Davies, O. R., Lewis, A. L., Whitaker, M. J., Tai, H., Shakesheff, K. M., & Howdle, S. M. (2008) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2006.12.001 · Cited by 299
A novel biomimetic approach to the design of high-performance ceramic–metal composites
Launey, M. E., Munch, E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0331 · Cited by 294
Cited by
Hierarchically porous materials: synthesis strategies and structure design
Yang, X.-Y., Chen, L.-H., Li, Y., Rooke, J. C., Sanchez, C., & Su, B.-L. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00829a · Cited by 1,439
A historical overview of the activation and porosity of metal–organic frameworks
Zhang, X., Chen, Z., Liu, X., Hanna, S. L., Wang, X., Taheri-Ledari, R., Maleki, A., Li, P., & Farha, O. K. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00997k · Cited by 692
PCL-Based Composite Scaffold Matrices for Tissue Engineering Applications
Siddiqui, N., Asawa, S., Birru, B., Baadhe, R., & Rao, S. (2018) · Molecular Biotechnology · doi:10.1007/s12033-018-0084-5 · Cited by 461
Hierarchically structured porous materials: synthesis strategies and applications in energy storage
Wu, L., Li, Y., Fu, Z., & Su, B.-L. (2020) · National Science Review · doi:10.1093/nsr/nwaa183 · Cited by 438
Scotti, K. L., & Dunand, D. C. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.01.001 · Cited by 377
Metadata
- Authors
- Qian, L., & Zhang, H.
- Venue
- Journal of Chemical Technology & Biotechnology
- Publisher
- Wiley
- Published
- 2010-09-02
- Volume
- 86
- Issue
- 2
- Pages
- 172-184
- ISSN
- 0142-0356 (ISSN-L)
- 0268-2575
- 1097-4660
- OpenAlex
- W1990668237
- Cited by
- 509
- References
- 5
- FWCI
- 19.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.