The DOI matches its Crossref record.
Application of dye saturated clay adsorbent from dyeing wastewater as textile printing pigment
Abstract
Background: Adsorption by cheap materials (like clay and activated carbon) is one of the most effective methods for treating dye wastewaters, especially for cationic dyes. Although activated carbon has a black residue, the unique nanostructure of clay adsorbs dye molecules between its layers and produces a colored sludge. Dye intercalated clays were also introduced as possible coloring pigments. This work tries to combine the wastewater treatment and hybrid pigment production processes so that the remaining sludge of the process can be used as a printing pigment. Results: Bentonite clay was examined for treating real dye wastewater from the textile industry containing four cationic dyes. The adsorption mechanism of all dyes was studied individually, and the results show that bentonite has a minimum adsorption capacity of 467 mg/g for Basic Red 46 dye based on the Langmuir model. The adsorption process decreased the turbidity by about 86% and reduced the total dissolved solids (TDS) and chemical oxygen demand (COD) of wastewater. The produced hybrid showed a nano‐layer structure according to the field emission scanning electron microscopy (FESEM). Differential thermal analysis (DTA) shows that the thermal stability of the pigment improved by about 30 °C compared to the pristine dye. Fourier transform infrared (FTIR) and thermogravimetric analysis (TGA) showed that the dye: bentonite ratio should be adjusted at a medium level to control the hydrophilicity of the hybrid and improve its miscibility in binders. Conclusion: The produced pigment was printed on cotton fabric with a desirable visual color appearance and showed acceptable rubbing and light fastnesses. The result indicates that wastewater sludge from this adsorption process could be applicable as an industrial pigment. © 2022 Society of Chemical Industry (SCI).
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The shift in -OH groups could be ascribed to formation of hydrogen bonds between the adsorbent surface and dye molecules.
“For example, the shift in -OH groups could be ascribed to the formation of hydrogen bonds between the adsorbent surface and the dye molecules [38].”
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 58
- 10.1016/j.jenvman.2016.07.090 · DOI · Paper page
- 10.1016/j.jenvman.2021.113133 · DOI
- 10.1016/j.jclepro.2018.07.051 · DOI
- 10.1016/j.eti.2021.101445 · DOI
- 10.2175/106143011X13203357278381 · DOI
- 10.1016/j.surfin.2019.100422 · DOI
- 10.1016/j.jece.2016.02.009 · DOI
- 10.1016/j.jclepro.2014.08.043 · DOI
- Abioye O, 2015, Bio‐removal of vat dye from textile effluent by Candida Tropicalis and Candida Apis isolated from soil, Expert Opin Environ Biol 4, 3, 2
- Fito J, 2020, Wastewater reclamation and reuse potentials in agriculture: towards environmental sustainability, Environ Dev Sustainability, 23
- 10.1016/j.jclepro.2010.12.018 · DOI
- 10.1016/S0921-3449(02)00122-2 · DOI
- 10.1016/j.jclepro.2016.10.103 · DOI
- 10.1016/j.eti.2019.100560 · DOI
- 10.1016/j.jenvman.2016.12.031 · DOI
- 10.1002/jctb.6891 · DOI
- 10.1016/j.molliq.2018.02.034 · DOI
- 10.1016/j.clay.2016.09.001 · DOI
- 10.1016/j.clay.2004.10.004 · DOI
- 10.1016/j.jenvman.2018.03.051 · DOI
- 10.1016/j.chemosphere.2005.10.033 · DOI
- 10.1016/j.jclepro.2015.11.016 · DOI
- Shore J, 2002, Colorants, Society of Dyers and Colourists
- Clark M, 2011, Handbook of Textile and Industrial Dyeing: Principles, Processes and Types of Dyes
- 10.1016/j.clay.2017.11.034 · DOI
- 10.1080/15422119.2013.823622 · DOI
- 10.1016/j.dyepig.2018.11.021 · DOI
- 10.1016/j.dyepig.2021.109306 · DOI
- 10.1016/j.clay.2014.06.001 · DOI
- 10.1180/claymin.2015.050.5.01 · DOI
- 10.1002/app.38903 · DOI
- 10.1021/acsomega.0c03354 · DOI
- 10.1016/j.dyepig.2022.110358 · DOI
- 10.1039/C9PP00141G · DOI
- 10.1016/j.clay.2019.105388 · DOI
- 10.1139/t01-077 · DOI
- 10.1039/a900007k · DOI
- Dargahi A, 2021, Statistical modeling of phenolic compounds adsorption onto low‐cost adsorbent prepared from aloe vera leaves wastes using CCD‐RSM optimization: effect of parameters, isotherm, and kinetic studies, Biomass Convers Biorefin, 1
- 10.1016/j.jclepro.2017.09.278 · DOI
- 10.1016/j.jcis.2004.08.078 · DOI
- 10.1016/j.chemosphere.2020.127279 · DOI · Paper page
- 10.1155/2017/3039817 · DOI · Paper page
- Bergaya F, 2013, Handbook of Clay Science
- Karim AB, 2017, Adsorption/desorption behavior of cationic dyes on Moroccan clay: equilibrium and mechanism, Journal of Materials and Environmental Science, 8
- 10.1016/j.jhazmat.2008.03.064 · DOI
- 10.1007/s11270-020-04968-2 · DOI
- 10.1016/j.micromeso.2008.03.017 · DOI
- 10.1016/S0169-1317(01)00068-0 · DOI
- 10.1016/j.desal.2006.10.024 · DOI
- 10.1007/s10847-012-0267-9 · DOI
- 10.1016/j.cej.2011.09.027 · DOI
- 10.1080/01496395.2019.1577896 · DOI
- 10.1016/j.colsurfa.2019.124152 · DOI
- 10.1016/j.molstruc.2013.11.051 · DOI
- 10.1016/j.aca.2005.10.077 · DOI
- 10.1002/app.39422 · DOI
- Validi M, 2012, Intercalatin of methylene blue into montmorillonite at different conditions: an approach for preparing clay‐based nanopigments, Ceramics‐Silikáty, 56, 152
- 10.1016/j.colsurfa.2013.12.032 · DOI
Cited by
Sorted by citations
Kalengyo, R. B., Ibrahim, M. G., Fujii, M., & Nasr, M. (2024) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-023-04111-1 · Cited by 64
Metadata
- Authors
- Rahimi, A. A., & Alihosseini, F.
- Venue
- Journal of Chemical Technology & Biotechnology
- Publisher
- Wiley
- Published
- 2022-08-05
- Volume
- 97
- Issue
- 11
- Pages
- 3152-3162
- ISSN
- 0268-2575
- 1097-4660
- Cited by
- 13
- References
- 0
- Language
- en
- Funders
- Isfahan University of Technology
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
