The DOI matches its Crossref record.
Process intensification of biodiesel production using a continuous oscillatory flow reactor
Open accessAbstract
Oscillatory flow reactors (OFRs) are a novel type of continuous reactor, consisting of tubes containing equally spaced orifice plate baffles. An oscillatory motion is superimposed upon the net flow of the process fluid, creating flow patterns conducive to efficient heat and mass transfer, whilst maintaining plug flow. Unlike conventional plug flow reactors, where a minimum Reynolds number must be maintained, the degree of mixing is independent of the net flow, allowing long residence times to be achieved in a reactor of greatly reduced length‐to‐diameter ratio. Many long residence time processes are currently performed in batch, as conventional designs of plug flow reactor prove to be impractical due to their high length‐to‐diameter ratios, which lead to problems such as high capital cost, large ‘footprint’, high pumping costs and, also control is difficult. The OFR allows these processes to be converted to continuous, thereby intensifying the process. The transesterification of various natural oils to form ‘biodiesel’ is a ‘long’ reaction, usually performed in batch. Conversion to continuous processing should improve the economics of the process, as the improved mixing should generate a better product (rendering the downstream separation processes easier), at lower residence time (reduction in reactor volume). These improvements can decrease the price of ‘biodiesel’, making it a more realistic competitor to ‘petrodiesel’. This paper shows that it is feasible to perform this reaction in an OFR at a lower residence time. The reaction was performed in a pilot‐scale plant, using rapeseed oil and methanol as the feedstocks, and NaOH as the catalyst. © 2003 Society of Chemical Industry
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Lam, M. K., Lee, K. T., & Mohamed, A. R. (2010) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.03.002 · Cited by 1,346
Microalgae biofuels: A critical review of issues, problems and the way forward
Lam, M. K., & Lee, K. T. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.11.008 · Cited by 936
Knothe, G., & Razon, L. F. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2016.08.001 · Cited by 734
Opportunities and challenges for biodiesel fuel
Lin, L., Cunshan, Z., Vittayapadung, S., Xiangqian, S., & Mingdong, D. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.09.029 · Cited by 723
Technologies for production of biodiesel focusing on green catalytic techniques: A review
Helwani, Z., Othman, M. R., Aziz, N., Fernando, W. J. N., & Kim, J. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.07.016 · Cited by 676
Hajjari, M., Tabatabaei, M., Aghbashlo, M., & Ghanavati, H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.034 · Cited by 513
Reactor technologies for biodiesel production and processing: A review
Tabatabaei, M., Aghbashlo, M., Dehhaghi, M., Panahi, H. K. S., Mollahosseini, A., Hosseini, M., & Soufiyan, M. M. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.06.001 · Cited by 483
Microwave energy potential for biodiesel production
Gude, V., Patil, P., Martinez-Guerra, E., Deng, S., & Nirmalakhandan, N. (2013) · Sustainable Chemical Processes · doi:10.1186/2043-7129-1-5 · Cited by 279
Process intensification technologies in continuous biodiesel production
Qiu, Z., Zhao, L., & Weatherley, L. (2010) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2010.03.005 · Cited by 266
Likozar, B., Pohar, A., & Levec, J. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2015.10.035 · Cited by 137
García-Martín, J. F., Barrios, C. C., Alés-Álvarez, F.-J., Dominguez-Sáez, A., & Alvarez-Mateos, P. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.03.002 · Cited by 80
Metadata
- Authors
- Harvey, A. P., Mackley, M. R., & Seliger, T.
- Venue
- Journal of Chemical Technology & Biotechnology
- Publisher
- Wiley
- Published
- 2003-02
- Volume
- 78
- Issue
- 2-3
- Pages
- 338-341
- ISSN
- 0142-0356 (ISSN-L)
- 0268-2575
- 1097-4660
- OpenAlex
- W2154859348
- Cited by
- 212
- References
- 0
- FWCI
- 1.54
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.