The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Simplifying the evaporation method for quantifying soil hydraulic properties
Abstract
Since about 25 years, we have measured the unsaturated hydraulic conductivity function and water retention curve with the evaporation method of more than 1500 mineral and organic soils samples. From this data base, 104 representative samples of varying texture and dry bulk density were selected and the temporal dynamics of the basic measured values (mass or water loss, respectively, and tension change over time) was analyzed. With the exception of sand, water loss per time interval was constant in all other mineral and organic soils during the measuring time in the tension range between 0 and about 60 kPa. In sands, the nonlinear water loss over time by evaporation can be described by a quadratic function with high accuracy (r 2 > 0.99). For all other soils, a linear function is sufficient (r 2 > 0.99). The use of evaporation functions enables extending weighing intervals. This reduces costs for the measuring equipment and increases the effectiveness of the method while maintaining the same quality of unsaturated hydraulic conductivity and water retention functions. It was confirmed that measuring with two tensiometers is sufficient for accurate hydraulic conductivity and water retention function. Reducing evaporation by screening the sample surface helps to decrease hydraulic gradients and keeps tension distributions approximately linear with depth. This is recommended in particular for clayey soils.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated Soils
van Genuchten, M. T. (1980) · Soil Science Society of America Journal · doi:10.2136/sssaj1980.03615995004400050002x · Cited by 27,578
Cited by
Simplified evaporation method for determining soil hydraulic properties
Peters, A., & Durner, W. (2008) · Journal of Hydrology · doi:10.1016/j.jhydrol.2008.04.016 · Cited by 361
Bordoni, M., Meisina, C., Valentino, R., Lu, N., Bittelli, M., & Chersich, S. (2015) · Engineering Geology · doi:10.1016/j.enggeo.2015.04.006 · Cited by 291
Dumroese, R. K., Heiskanen, J., Englund, K., & Tervahauta, A. (2011) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.053 · Cited by 215
Metadata
- Authors
- Schindler, U., & Müller, L.
- Venue
- Journal of Plant Nutrition and Soil Science
- Publisher
- Wiley
- Published
- 2006-09-29
- Volume
- 169
- Issue
- 5
- Pages
- 623-629
- ISSN
- 1436-8730 (ISSN-L)
- 1522-2624
- OpenAlex
- W1995928150
- Cited by
- 164
- References
- 1
- FWCI
- 7.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.