Low‐density extraction solvent based solvent‐terminated dispersive liquid–liquid microextraction for quantitative determination of ionizable pesticides in environmental waters
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
A rapid, efficient, and new solvent terminated dispersive liquid–liquid microextraction technique coupled with HPLC was developed for selective extraction and analysis of s‐triazine herbicides from environmental water samples. Important parameters influencing the extraction process including type and volume of extraction and disperser solvent, extraction time, sample p H, ionic strength, and extraction temperature were successfully optimized. Under the optimal conditions, there are excellent linear relationships between the analytical results and concentration in the range of 10–400 mg/L for atrazine, propazine, prometryn, and terbutryn. LOD and LOQ ranged from 0.60 to 2.33 μg/L and 2.0 to 7.7 μg/L, respectively. Performance of the analytical technique was evaluated by carrying out the repeatability and reproducibility analyses that were ranged from 2.86 to 5.66% and 4.64 to 5.89% for 100 μg/L of each target analyte, respectively. The proposed method has been successfully applied to the analysis of real water samples and acceptable relative recoveries over the range of 65.93–101.46%, with RSD s ≤ 8.80%, were obtained. The overall results have been compared with the literature values. Thus, the method developed could efficiently be used for selective extraction of the target analytes from complex matrices, particularly environmental waters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Determination of organic compounds in water using dispersive liquid–liquid microextraction
Rezaee, M., Assadi, Y., Milani Hosseini, M.-R., Aghaee, E., Ahmadi, F., & Berijani, S. (2006) · Journal of Chromatography A · doi:10.1016/j.chroma.2006.03.007 · Cited by 3,402
Dispersive liquid-liquid microextraction
Zgoła-Grześkowiak, A., & Grześkowiak, T. (2011) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2011.04.014 · Cited by 476
Nagaraju, D., & Huang, S.-D. (2007) · Journal of Chromatography A · doi:10.1016/j.chroma.2007.05.065 · Cited by 312
Cited by
Recent developments in dispersive liquid–liquid microextraction
Saraji, M., & Boroujeni, M. K. (2014) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-013-7467-z · Cited by 232
“Although solvents with a density higher than that of water were initially used in DLLME, lower-density solvents have also been applied [37–40].”
MethodTen years of dispersive liquid–liquid microextraction and derived techniques
Campillo, N., Viñas, P., Šandrejová, J., & Andruch, V. (2017) · Applied Spectroscopy Reviews · doi:10.1080/05704928.2016.1224240 · Cited by 102
“In most cases, de-emulsification takes place by adding a second aliquot of disperser solvent (205, 311, 429, 484, 634, 645, 697, 892, 915, 1260, 1512), although de-emulsifier solvents of a different nature than that of the disperser have been used (253, 915).”
BackgroundSolvent-terminated dispersive liquid-liquid microextraction: a tutorial
Mansour, F. R., & Danielson, N. D. (2018) · Analytica Chimica Acta · doi:10.1016/j.aca.2018.02.005 · Cited by 64
Metadata
- Authors
- Tolcha, T., Merdassa, Y., & Megersa, N.
- Venue
- Journal of Separation Science
- Publisher
- Wiley
- Published
- 2013-03
- Volume
- 36
- Issue
- 6
- Pages
- 1119-1127
- ISSN
- 1615-9306 (ISSN-L)
- 1615-9314
- OpenAlex
- W2099948409
- Cited by
- 44
- References
- 3
- FWCI
- 3.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Low‐density extraction solvent based solvent‐terminated dispersive liquid–liquid microextraction for quantitative determination of ionizable pesticides in environmental waters. https://app.cochat.ai/papers/10.1002/jssc.201200849
- The paper
- Tolcha, T., Merdassa, Y., & Megersa, N. (2013). Low‐density extraction solvent based solvent‐terminated dispersive liquid–liquid microextraction for quantitative determination of ionizable pesticides in environmental waters. Journal of Separation Science. https://doi.org/10.1002/jssc.201200849
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.