The role of alloying elements in commercial alloys for corrosion resistance in oxidizing‐chloridizing atmospheres. Part II: Experimental investigations
The DOI matches its Crossref record.
Abstract
In an extensive study the role of the alloying elements in commercial alloys for corrosion resistance was studied in air without and with 0.1 and 2 vol.% Cl 2, respectively. In the first part of this paper [1] the thermodynamic fundamentals were discussed on the basis of the new concept of the quasi‐stability diagrams. The second part which is presented here reports the results from investigations at 650, 800 and 1000°C and testing times up to 1000 hrs where 14 commercial alloys were tested with regard to their corrosion behavior. The materials were selected so that the role of the alloying elements Mo, C, Si, Al, N, Fe, Ni and Cr would be evident from the results. The exposure tests were followed by extensive microstructural analyses of the corrosion scales and the metal subsurface zones so that type, mechanism and extent of corrosion could be characterized in great detail. At the end a ranking was possible of the different materials and with regard to the detrimental or beneficial role of the different alloying elements. The present results thus provide a much deeper insight into materials resistance in oxidizing‐chloridizing environments at high temperatures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Initial Stages of the HCl-Induced High-Temperature Corrosion of Alloy 310
Folkeson, N., Johansson, L.-G., & Svensson, J.-E. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2754174 · Cited by 66
Corrosion behaviour of 316 stainless steel in NaCl-KCl-MgCl2 salt vapour at 700°C
Liu, Q., Xu, H., Yin, H., Li, N., Wang, W., Li, L., Tang, Z., & Qian, Y. (2022) · Corrosion Science · doi:10.1016/j.corsci.2021.109921 · Cited by 50
KCl-Induced High-Temperature Corrosion Behavior of HVAF-Sprayed Ni-Based Coatings in Ambient Air
Jafari, R., Sadeghimeresht, E., Farahani, T. S., Huhtakangas, M., Markocsan, N., & Joshi, S. (2018) · Journal of Thermal Spray Technology · doi:10.1007/s11666-017-0684-9 · Cited by 37
Metadata
- Authors
- Bender, R., & Schütze, M.
- Venue
- Materials and Corrosion
- Publisher
- Wiley
- Published
- 2003-09
- Volume
- 54
- Issue
- 9
- Pages
- 652-686
- ISSN
- 0043-2822 (ISSN-L)
- 0947-5117
- 1521-4176
- OpenAlex
- W2084851765
- Cited by
- 54
- References
- 0
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The role of alloying elements in commercial alloys for corrosion resistance in oxidizing‐chloridizing atmospheres. Part II: Experimental investigations. https://app.cochat.ai/papers/10.1002/maco.200303673
- The paper
- Bender, R., & Schütze, M. (2003). The role of alloying elements in commercial alloys for corrosion resistance in oxidizing‐chloridizing atmospheres. Part II: Experimental investigations. Materials and Corrosion. https://doi.org/10.1002/maco.200303673
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.