Cold Crystallization of PLLA Studied by Simultaneous SAXS and WAXS
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Summary: The cold crystallization process of initially amorphous poly(L‐lactic acid), PLLA, with two different molecular weights, during a heating at 2 °C/min, was investigated by DSC and time‐resolved simultaneous SAXS and WAXS, using synchrotron radiation. Equatorial scans of the isotropic 2D‐SAXS patterns showed that the average Bragg long period (LB) of PLLA samples was approximately constant with the development of cold crystallization up to a temperature that corresponded to a melt/re‐crystallization process that took place before the nominal melting peak seen by DSC. LB values were found to be higher for the high molecular weight material. This was in accordance with the higher melting temperature observed in the high molecular weight PLLA that implied the existence of thicker lamellae. WAXS results showed that the molecular weight did not apparently affect the crystal form and the final degree of crystallinity of PLLA. The Avrami parameters from WAXS and DSC were consistent, showing that the non‐isothermal cold crystallization of the two PLLA samples corresponded mainly to a three‐dimensional growth, although an imperfect crystallization process was involved at early times. The crystallization rate of PLLA, observed both by WAXS and DSC, decreased with increasing molecular weight. SAXS profiles of PLLA2 as a function of temperature. The inset shows the 2D‐SAXS pattern obtained at 180 °C. magnified imageSAXS profiles of PLLA2 as a function of temperature. The inset shows the 2D‐SAXS pattern obtained at 180 °C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Crystallization kinetics of poly(l-lactic acid)
Vasanthakumari, R., & Pennings, A. J. (1983) · Polymer · doi:10.1016/0032-3861(83)90129-5 · Cited by 406
Tsuji, H., & Ikada, Y. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00111-1 · Cited by 329
Wang, Z.-G., Wang, X., Hsiao, B. S., Andjelić, S., Jamiolkowski, D., McDivitt, J., Fischer, J., Zhou, J., & Han, C. C. (2001) · Polymer · doi:10.1016/s0032-3861(01)00374-3 · Cited by 37
Cited by
Crystallization and Melting Behavior of Poly ( l -lactic Acid)
Kawai, T., Rahman, N., Matsuba, G., Nishida, K., Kanaya, T., Nakano, M., Okamoto, H., Kawada, J., Usuki, A., Honma, N., et al. (2007) · Macromolecules · doi:10.1021/ma070082c · Cited by 636
Infrared Spectrum of Poly(l-lactide): Application to Crystallinity Studies
Meaurio, E., López-Rodríguez, N., & Sarasua, J. R. (2006) · Macromolecules · doi:10.1021/ma061890r · Cited by 258
Isothermal cold crystallization kinetics of polylactide/nucleating agents
Liao, R., Yang, B., Yu, W., & Zhou, C. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25733 · Cited by 199
Tashiro, K., Kouno, N., Wang, H., & Tsuji, H. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01468 · Cited by 143
Influence of melting conditions on the thermal behaviour of poly(l-lactic acid)
Wang, Y., & Mano, J. F. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.04.030 · Cited by 113
Self-citation
Metadata
- Authors
- Mano, J. F., Wang, Y., Viana, J. C., Denchev, Z., & Oliveira, M. J.
- Venue
- Macromolecular Materials and Engineering
- Publisher
- Wiley
- Published
- 2004-10-11
- Volume
- 289
- Issue
- 10
- Pages
- 910-915
- ISSN
- 1438-7492 (ISSN-L)
- 1439-2054
- OpenAlex
- W2092109024
- Cited by
- 138
- References
- 5
- FWCI
- 6.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.