Quality Concepts for the Improved Use of Recycled Polymeric Materials: A Review
Open accessThe DOI matches its Crossref record; 138 of the 138 references it cites were found in a registry or an index.
Abstract
Abstract Polymeric waste materials should be considered resources for the manufacture of new products through recycling processes, with a similar status to virgin fossil‐based plastics and biopolymers from renewable resources. Several efforts can be made to achieve this qualitative quantum leap in plastics recycling, and consequently introduce recycled products, with competitive performance, to the market. Scientific knowledge about the degradation processes during the life cycle and the development of fast and reliable analytical methods for the quality assessment of recycled plastics are fundamental to guarantee their performance in new applications. Different strategies—restabilisation, rebuilding, compatibilisation, and addition of elastomers and fillers—can be used to upgrade the structure and properties of polymeric waste streams. This review discusses recent developments in the mechanical recycling of plastics, focusing on how to produce quality materials from waste streams and, thus, contribute to a sustainable management of resources and energy. magnified image
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“For example, Vilaplana and Karlsson (2008) found that the elastic modulus of polypropylene (PP) decreased after reprocessing, indicating the material becomes less elastic and more brittle.”
From Packaging design for the circular economy: A systematic review (2022) · cites this paper as Vilaplana and Karlsson (2008)
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An overview of brominated flame retardants in the environment
de Wit, C. A. (2002) · Chemosphere · doi:10.1016/s0045-6535(01)00225-9 · Cited by 2,811
Brominated flame retardants: cause for concern?
Birnbaum, L. S., & Staskal, D. F. (2004) · Environmental Health Perspectives · doi:10.1289/ehp.6559 · Cited by 1,702
Awaja, F., & Pavel, D. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.02.005 · Cited by 1,045
Espert, A., Vilaplana, F., & Karlsson, S. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.04.004 · Cited by 876
Self-citationLife cycle assessment of energy from solid waste—part 1: general methodology and results
Finnveden, G., Johansson, J., Lind, P., & Moberg, Å. (2005) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2004.02.023 · Cited by 397
Recent developments in the analysis of brominated flame retardants and brominated natural compounds
Covaci, A., Voorspoels, S., Ramos, L., Neels, H., & Blust, R. (2007) · Journal of Chromatography A · doi:10.1016/j.chroma.2006.11.060 · Cited by 269
Silkworm silk as an engineering material
P�rez-Rigueiro, J., Viney, C., LLorca, J., & Elices, M. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19981219)70:12<2381::aid-app10>3.0.co;2-v · Cited by 257
Schlummer, M., Gruber, L., Mäurer, A., Wolz, G., & van Eldik, R. (2007) · Chemosphere · doi:10.1016/j.chemosphere.2006.05.077 · Cited by 235
Structure and rheology of recycled PET modified by reactive extrusion
Incarnato, L., Scarfato, P., Di Maio, L., & Acierno, D. (2000) · Polymer · doi:10.1016/s0032-3861(00)00032-x · Cited by 230
Morf, L. S., Tremp, J., Gloor, R., Huber, Y., Stengele, M., & Zennegg, M. (2005) · Environmental Science & Technology · doi:10.1021/es051170k · Cited by 213
Research works printed but not linked: 6
- La Mantia F. P., 2002, Properties ‐ Reprocessing Behaviour of Recycled Plastics
- Stromberg E., Eur. Polym. J.
- E.Strömberg F.Vilaplana S.Ågren A.Ribes‐Greus S.Karlsson Identiplast 2005 – Identifying the Opportunities for Plastics Recovery Brussels 2005 Conference Proceedings.
- Camacho W., 2001, Polym. Recycling, 6, 89
- Karlsson S., 2002, Polym. News, 27, 305
- Scaffaro R., 2002, Virgin/Recycled Homopolymer Blends
Cited by
Items 101–200 of 493
Rath, S. S., Nayak, P., Mukherjee, P. S., Chaudhury, G. R., & Mishra, B. (2011) · Waste Management · doi:10.1016/j.wasman.2011.11.001 · Cited by 58
Abdullah, M., & Abedin, M. Z. (2024) · Results in Surfaces and Interfaces · doi:10.1016/j.rsurfi.2024.100221 · Cited by 57
Hirayama, D., & Saron, C. (2017) · Polymer · doi:10.1016/j.polymer.2017.12.038 · Cited by 57
Odorant composition of post-consumer LDPE bags originating from different collection systems
Cabanes, A., Strangl, M., Ortner, E., Fullana, A., & Buettner, A. (2020) · Waste Management · doi:10.1016/j.wasman.2020.01.021 · Cited by 56
Challenges and Opportunities for Recycled Polyethylene Fishing Nets: Towards a Circular Economy
Juan, R., Domínguez, C., Robledo, N., Paredes, B., Galera, S., & García‐Muñoz, R. A. (2021) · Polymers · doi:10.3390/polym13183155 · Cited by 56
A review on composite materials based on recycled thermoplastics and glass fibres
Scelsi, L., Hodzic, A., Soutis, C., Hayes, S. A., Rajendran, S., Al‐Maadeed, M. A. A., & Kahraman, R. (2011) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1179/174328911x12940139029121 · Cited by 55
Suresh, S. S., Bonda, S., Mohanty, S., & NAYAK, S. K. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2018.03.003 · Cited by 54
Plastic waste in a circular economy
Hahladakis, J. Ν., Iacovidou, E., & Gerassimidou, S. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-22069-2.00003-6 · Cited by 53
Effect of Thermal and Hydrothermal Accelerated Aging on 3D Printed Polylactic Acid
Bergaliyeva, S., Sales, D. L., Delgado, F., Болегенова, С. А., & Molina, S. I. (2022) · Polymers · doi:10.3390/polym14235256 · Cited by 51
Badia-Valiente, J. D., Strömberg, E., Kittikorn, T., Ek, M., Karlsson, S., & Ribes-Greus, A. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.06.004 · Cited by 50
Self-citationSignoret, C., Edo, M., Lafon, D., Caro‐Bretelle, A. S., Lopez‐Cuesta, J., Ienny, P., & Perrin, D. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01741-8 · Cited by 50
Hahladakis, J. Ν., & Jabri, H. M. S. J. A. (2018) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2018.10.390 · Cited by 49
Santos, M. C., Nóbrega, J. A., Baccan, N., & Cadore, S. (2010) · Talanta · doi:10.1016/j.talanta.2010.03.038 · Cited by 49
Assessment of tetrabromobisphenol-A (TBBPA) content in plastic waste recovered from WEEE
Kousaiti, A., Hahladakis, J. Ν., Savvilotidou, V., Pivnenko, K., Tyrovola, K., Xekoukoulotakis, N. P., Astrup, T. F., & Gidarakos, E. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121641 · Cited by 48
A mini-review of the physical recycling methods for plastic parts in end-of-life vehicles
Sanz, V. M., Serrano, A. M., & Schlummer, M. (2022) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x221094917 · Cited by 47
Santos, M. C., Nóbrega, J. A., & Cadore, S. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.04.004 · Cited by 47
Liu, W., Zhu, Z., & Ye, S. (2023) · Circular Economy and Sustainability · doi:10.1007/s43615-023-00264-3 · Cited by 46
Mousavi, M., Kowsari, E., Gheibi, M., Cheshmeh, Z. A., Teymoorian, T., & Ramakrishna, S. (2024) · Materials Circular Economy · doi:10.1007/s42824-023-00098-2 · Cited by 46
Reprocessed polylactide: Studies of thermo-oxidative decomposition
Badia-Valiente, J. D., Santonja‐Blasco, L., Martínez-Felipe, A., & Ribes-Greus, A. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.02.128 · Cited by 46
Hansen, B., Borsoi, C., Júnior, M. A. D., & Catto, A. L. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111696 · Cited by 46
Arenas‐Vivo, A., Beltrán, F. R., Alcázar, V., de la Orden, M. U., & Urreaga, J. M. (2017) · Materials Today Communications · doi:10.1016/j.mtcomm.2017.07.008 · Cited by 44
Badia-Valiente, J. D., Santonja‐Blasco, L., Martínez-Felipe, A., & Ribes-Greus, A. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.02.013 · Cited by 43
Nguyen, K. Q., Vuillaume, P. Y., Hu, L., López‐Beceiro, J., Cousin, P., Elkoun, S., & Robert, M. (2023) · Materials Sciences and Applications · doi:10.4236/msa.2023.143010 · Cited by 43
Gall, M., Steinbichler, G., & Lang, R. W. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109576 · Cited by 42
Optical Properties of Polypropylene upon Recycling
Santis, F. D., & Pantani, R. (2013) · The Scientific World JOURNAL · doi:10.1155/2013/354093 · Cited by 42
Garofalo, E., Maio, L. D., Scarfato, P., Gregorio, F. D., & Incarnato, L. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.03.019 · Cited by 41
Design from recycling: Overcoming barriers in regranulate use in a circular economy
Seier, M., Roitner, J., Archodoulaki, V., & Jones, M. P. (2023) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2023.107052 · Cited by 41
Bovea, M. D., Pérez‐Belis, V., Ibáñez‐Forés, V., & Quemades-Beltrán, P. (2016) · Waste Management · doi:10.1016/j.wasman.2016.04.011 · Cited by 40
Niaounakis, M. (2013) · Elsevier eBooks · doi:10.1016/b978-1-4557-3145-9.00003-8 · Cited by 39
Vilaplana, F., Ribes-Greus, A., & Karlsson, S. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.033 · Cited by 39
Self-citationRibeiro, V. F., Junior, N. S. D., & Riegel-Vidotti, I. C. (2012) · Polímeros · doi:10.1590/s0104-14282012005000023 · Cited by 39
Waste electric and electronic toys: Management practices and characterisation
Pérez‐Belis, V., Bovea, M. D., & Gómez, A. (2013) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2013.05.002 · Cited by 38
Toward Intelligent Materials with the Promise of Self-Healing Hydrogels in Flexible Devices
Song, H.-S., Rumon, M. M. H., Khan, M. M. R., & Jeong, J.-H. (2025) · Polymers · doi:10.3390/polym17040542 · Cited by 38
Influence of biodegradable materials in the recycled polystyrene
Samper, M. D., Arrieta, M. P., Santiago, F., & Juan, L. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41161 · Cited by 38
Structure and properties of clay/recycled plastic composites
Istrate, O. M., & Chen, B. (2018) · Applied Clay Science · doi:10.1016/j.clay.2018.01.039 · Cited by 37
A “polymer-to-polymer” recycling of PET by the dissolution-precipitation strategy
Deng, L., Yang, S., He, H., Chen, J., Zhang, C., Liu, Z., & Wang, L. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.115684 · Cited by 36
Dielectric spectroscopy of recycled polylactide
Badia-Valiente, J. D., Monreal, L., de Juano-Arbona, V. S., & Ribes-Greus, A. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.04.023 · Cited by 36
Salah, L. S., Ouslimani, N., Danlée, Y., Beltrán, F. R., Huynen, I., & de la Orden, M. U. (2022) · Composites Part C Open Access · doi:10.1016/j.jcomc.2022.100339 · Cited by 34
The Diffusion of Bioplastics: What Can We Learn from Poly(Lactic Acid)?
Teixeira, L. V., Bomtempo, J. V., Oroski, F. D. A., & Coutinho, P. L. D. A. (2023) · Sustainability · doi:10.3390/su15064699 · Cited by 34
CHARACTERIZATION OF POLYOLEFINS WASTES BY FTIR SPECTROSCOPY
Moldovan, A., & Buican, R. (2012) · Cited by 33
Taneepanichskul, N., Hailes, H. C., & Miodownik, M. A. (2023) · Frontiers in Sustainability · doi:10.3389/frsus.2023.1125954 · Cited by 33
Megevand, B., Cao, W.-J., Maio, F. D., & Rem, P. C. (2022) · Sustainability · doi:10.3390/su14020962 · Cited by 32
Khan, W. A., Hassan, M., Ahmed, I., Xiao, M., Faraz, M. I., Li, K., Khan, I., Muhammad, R., Wu, H., & Hussain, G. (2024) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2024.05.011 · Cited by 32
Traxler, I., Marschik, C., Farthofer, M., Laske, S., & Fischer, J. (2022) · Polymers · doi:10.3390/polym14132699 · Cited by 32
Vilaplana, F., Martínez‐Sanz, M., Ribes-Greus, A., & Karlsson, S. (2009) · Journal of Chromatography A · doi:10.1016/j.chroma.2009.11.057 · Cited by 32
Self-citationQuantification of recycled content in plastics: a review
Soomro, S. S., Hong, C., & Shaver, M. P. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108426 · Cited by 31
Meng, T., Klepacka, A. M., Florkowski, W. J., & Braman, S. K. (2015) · Waste Management · doi:10.1016/j.wasman.2015.11.013 · Cited by 31
Reprocessability of PLA through Chain Extension for Fused Filament Fabrication
Correia, C. M., Gomes, T. E. P., Gonçalves, I., & Neto, V. F. S. (2022) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp6010026 · Cited by 30
Charles, A., Bassan, P. M., Mueller, T., Elkaseer, A., & Scholz, S. G. (2019) · Smart innovation, systems and technologies · doi:10.1007/978-981-13-9271-9_30 · Cited by 30
Vilaplana, F., Karlsson, S., Ribes-Greus, A., Schade, C., & Nestle, N. (2011) · Polymer · doi:10.1016/j.polymer.2011.02.005 · Cited by 30
Self-citationInfluence of the Molar Mass on Long-Chain Branching of Polypropylene
Kamleitner, F., Duscher, B., Koch, T., Knaus, S., Schmid, K., & Archodoulaki, V. (2017) · Polymers · doi:10.3390/polym9090442 · Cited by 30
Analysis of different polypropylene waste bales: Evaluation of the source material for PP recycling
Geier, J., Bredács, M., Witschnigg, A., Vollprecht, D., & Oreški, G. (2024) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x241227369 · Cited by 29
Luo, M., Wang, H., Zhang, Y., Zhong, Y., & Wang, K. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.05.049 · Cited by 29
Mechanical Properties of Recycled Plastics
Rosli, N. A., & Ahmad, I. B. (2021) · Composites science and technology · doi:10.1007/978-981-16-3627-1_11 · Cited by 29
Marques, G. G., Couffin, A., Hajji, P., Inoubli, R., Bounor‐Legaré, V., & Fulchiron, R. (2024) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c02376 · Cited by 28
A first assessment of the impact of impurities in PP and PE recycled plastics
Chacon, F. A., Brouwer, M. T., van Velzen, E. U. T., & Smeding, I. W. (2020) · doi:10.18174/518299 · Cited by 28
Pasciucco, F., Rossi, D., Maccaferri, E., Pecorini, I., Giorgini, L., & Seggiani, M. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.144634 · Cited by 28
Oleszek, S., Grabda, M., Shibata, E., & Nakamura, T. (2011) · Thermochimica Acta · doi:10.1016/j.tca.2011.09.014 · Cited by 28
Möllnitz, S., Küppers, B., Curtis, A., Khodier, K., & Šarc, R. (2020) · Waste Management · doi:10.1016/j.wasman.2020.10.007 · Cited by 27
Effect of Bio‐Based Cobalt Alginate on the Fire Safety and Mechanical Properties for Epoxy Resin
Liu, C., Tao, Y., Xu, Y., Liu, Y., Zhu, P., & Wang, Y. (2021) · Macromolecular Materials and Engineering · doi:10.1002/mame.202100466 · Cited by 27
Nagengast, N. D., Bay, C., Döpper, F., Schmidt, H., & Neuber, C. (2023) · Polymers · doi:10.3390/polym15102291 · Cited by 26
Strategies for recycling multi-material polymer blends for additive manufacturing
Gonzalez, C. S., Basdeo, A., Sanchez, F. A. C., Nouvel, C., Pearce, J. M., & Boudaoud, H. (2025) · Sustainable materials and technologies · doi:10.1016/j.susmat.2025.e01430 · Cited by 26
Hirayama, D., Nunnenkamp, L. A., Braga, F. H. G., & Saron, C. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51873 · Cited by 25
van Velzen, E. U. T., Workala, Y., Teunissen, W., & Smeding, I. W. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.142571 · Cited by 25
Cascadic degradation of selected polyolefin grades in a simulated closed-loop recycling process
Akhras, M. H., Langwieser, J., Czaker, S., Felgel-Farnholz, A., & Fischer, J. (2024) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-024-02818-x · Cited by 25
Geier, J., Barretta, C., Hinczica, J., Haar, B., Bredács, M., Witschnigg, A., Mayrbäurl, E., & Oreški, G. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.55694 · Cited by 25
Elevating Recycling Standards: Global Requirements for Plastic Traceability and Quality Testing
Gazeau, B., Minunno, R., Zaman, A. U., & Shaikh, F. U. A. (2024) · Sustainability · doi:10.3390/su16125122 · Cited by 25
Cucuzza, P., Serranti, S., Bonifazi, G., & Capobianco, G. (2021) · Journal of Imaging · doi:10.3390/jimaging7090181 · Cited by 25
Effect of Hard Plastic Waste on the Quality of Recycled Polypropylene Blends
Tratzi, P., Giuliani, C., Torre, M., Tomassetti, L., Petrucci, R., Iannoni, A., Torre, L., Genova, S., Paolini, V., Petracchini, F., et al. (2021) · Recycling · doi:10.3390/recycling6030058 · Cited by 24
Wagner, F. L., Peeters, J. R., Ramon, H., Keyzer, J. D., Duflou, J. R., & Dewulf, W. (2020) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2020.104801 · Cited by 24
Marć, M., & Zabiegała, B. (2017) · Microchemical Journal · doi:10.1016/j.microc.2017.04.015 · Cited by 24
Cleaning efficiency of poly(ethylene terephthalate) washing procedure in recycling process
Krehula, L. K., Siročić, A. P., Dukić, M., & Hrnjak‐Murgić, Z. (2012) · Journal of Elastomers & Plastics · doi:10.1177/0095244312457798 · Cited by 24
Re-Formative Polymer Composites from Plastic Waste: Novel Infrastructural Product Application
Turner, R. P., Kelly, C. A., Fox, R., & Hopkins, B. (2018) · Recycling · doi:10.3390/recycling3040054 · Cited by 24
Félix, J. S., Alfaro, P., & Nerín, C. (2010) · Analytica Chimica Acta · doi:10.1016/j.aca.2010.12.013 · Cited by 23
An Innovative Route to Circular Rigid Plastics
van Engelshoven, Y., Wen, P., Bakker, M. C. M., Balkenende, R., & Rem, P. C. (2019) · Sustainability · doi:10.3390/su11226284 · Cited by 23
Belblidia, F., Gabr, M. H., Pittman, J. F. T., & Rajkumar, A. (2023) · Progress in Rubber Plastics and Recycling Technology · doi:10.1177/14777606231168653 · Cited by 23
Schulte, A., Velarde, P. Á. S., Marbach, L., & Mörbitz, P. (2022) · Resources Conservation & Recycling Advances · doi:10.1016/j.rcradv.2022.200127 · Cited by 23
Fate of lead oxide during thermal treatment with tetrabromobisphenol A
Oleszek, S., Grabda, M., Shibata, E., & Nakamura, T. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.07.028 · Cited by 23
Aratani, N., Katada, I., Nakayama, K., Terano, M., & Taniike, T. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.09.025 · Cited by 22
An, J., Kang, B.-H., Choi, B., & Kim, H.-J. (2014) · Tribology International · doi:10.1016/j.triboint.2014.04.011 · Cited by 22
Xie, L.-G., Sun, H.-M., & Shao-hong, J. (2011) · Analytica Chimica Acta · doi:10.1016/j.aca.2011.06.009 · Cited by 22
BENCHMARK ANALYSIS FOR PLASTIC RECYCLATES IN AUSTRIAN WASTE MANAGEMENT
Friedrich, K., Möllnitz, S., Holzschuster, S., Pomberger, R., Vollprecht, D., & Šarc, R. (2019) · Detritus · doi:10.31025/2611-4135/2019.13869 · Cited by 21
Compatibilization strategies toward new polymer materials from re-/up-cycled plastics
Nechifor, M., Tanasă, F., Teacă, C., & Zănoagă, M. (2018) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2018.1509493 · Cited by 21
Schrader, J. A., McCabe, K. G., Srinivasan, G., Haubrich, K., Grewell, D. A., Madbouly, S. A., & Graves, W. R. (2015) · Acta Horticulturae · doi:10.17660/actahortic.2015.1104.13 · Cited by 21
Verberckmoes, A., Fernandez, E., Martins, C., Reyes, P., Cardon, L., D'hooge, D. R., & Edeleva, M. (2024) · Polymer · doi:10.1016/j.polymer.2024.126999 · Cited by 20
Khan, M. R., Sadiq, M. B., Vápenka, L., Volpe, S., Rajchl, A., & Torrieri, E. (2024) · Waste Management · doi:10.1016/j.wasman.2024.08.001 · Cited by 20
Upgrading of recycled plastics obtained from flexible packaging waste by adding nanosilicates
Garofalo, E., Claro, M., Scarfato, P., Maio, L. D., & Incarnato, L. (2015) · AIP conference proceedings · doi:10.1063/1.4937331 · Cited by 20
Upcycling plastic waste into fully recyclable composites through cold sintering
Lai, P.-H., Hall, S. L., Lan, Y.-C., Ai, J.-R., Jaberi, A., Sheikhi, A., Shi, R., Vogt, B. D., & Gomez, E. D. (2024) · Materials Horizons · doi:10.1039/d3mh01976d · Cited by 20
Flexible laminates within the circular economy
van Velzen, E. U. T., de Weert, L., & Molenveld, K. (2020) · doi:10.18174/519019 · Cited by 19
Klingenberg, P., Brüll, R., Fell, T., Barton, B., Soll, M., Emans, T., Bakker, F., & Geertz, G. (2024) · Waste Management · doi:10.1016/j.wasman.2024.02.020 · Cited by 19
Spiegel, S. (2009) · Macromolecular Materials and Engineering · doi:10.1002/mame.200800349 · Cited by 19
Gil-Castell, O., Badia-Valiente, J. D., & Ribes-Greus, A. (2017) · JOURNAL OF RENEWABLE MATERIALS · doi:10.7569/jrm.2017.634170 · Cited by 18
Mechanical and Thermal Properties of Mixed PE Fractions from Post-Consumer Plastic Packaging Waste
Noyan, E. C. B., Venkatesh, A., & Boldizar, A. (2022) · ACS Omega · doi:10.1021/acsomega.2c05621 · Cited by 18
Recycle and Reuse to Reduce Plastic Waste - A Perspective Study Comparing Petro- and Bioplastics
Mneimneh, F., Haddad, N., & Ramakrishna, S. (2024) · Circular Economy and Sustainability · doi:10.1007/s43615-024-00381-7 · Cited by 18
Miu, E. V., Fox, A. J., Jubb, S. H., & Wakabayashi, K. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.43070 · Cited by 18
Zeng, S., Zhang, H., Li, Z.-K., Hu, C., & Wang, Z. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.55097 · Cited by 18
Modification of Poly(vinyl chloride) Substrates via Schiff's Base for Photochemical Applications
Abdallh, M., Bufaroosha, M., Ahmed, A., Ahmed, D. S., & Yousif, E. A. (2020) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.21762 · Cited by 18
Pogorelčnik, B., Pulko, I., Wilhelm, T. E., & Žigon, M. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.48377 · Cited by 18
Bai, X., Stein, B. K., Smith, K., & Isaac, D. H. (2012) · Progress in Rubber Plastics and Recycling Technology · doi:10.1177/147776061202800101 · Cited by 18
Recycled Polyolefin Blends: Effect of Modified Natural Zeolite on their Properties and Morphology
Borovanska, I., Cerrada, M. L., Zipper, P., & Djoumaliisky, S. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1070865 · Cited by 17
Metadata
- Authors
- Vilaplana, F., & Karlsson, S.
- Affiliations
- KTH Royal Institute of Technology (SE)
- Corresponding author
- Karlsson, Sigbritt
- Venue
- Macromolecular Materials and Engineering
- Publisher
- Wiley
- Published
- 2008-04-04
- Volume
- 293
- Issue
- 4
- Pages
- 274-297
- ISSN
- 1438-7492 (ISSN-L)
- 1439-2054
- OpenAlex
- W2001112511
- Cited by
- 414
- References
- 138
- Citations by year
- 2026: 52 · 2025: 40 · 2024: 46 · 2023: 23 · 2022: 34 · 2021: 35 · 2020: 27 · 2019: 29 · 2018: 23 · 2017: 14 · 2016: 12 · 2015: 12 · 2014: 13 · 2013: 14 · 2012: 13
- FWCI
- 0.53
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Locations
- Macromolecular Materials and Engineering (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Environmental Science › Waste Management and Disposal › Waste Management and Recycling
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Keywords
- recycled plastics, plastic waste, mechanical recycling, quality assessment, rebuilding, compatibilization, elastomers, fillers, degradation processes, waste-to-resource, sustainable resource management
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.