The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Ink‐Jet Printing, Self‐Assembled Polyelectrolytes, and Electroless Plating: Low Cost Fabrication of Circuits on a Flexible Substrate at Room Temperature
Abstract
Summary: The driving forces behind the development of flexible electronics are their flexibility, lightweightedness, and potential for low‐cost manufacturing. However, because of physical limitations, traditional thermal processes cause deformations in the flexible substrate. As a result, the adhesion quality of the printed wires is deteriorated. This article reviews recent developments in printing circuits on a flexible substrate by combining self‐assembled polyelectrolytes, ink‐jet printing of a catalyst, and electroless plating of metals. The limitations and potential applications of this technology are also discussed. Experiments implementing this technology demonstrated significant results. By a vibration‐induced assistance during an ink‐jet printing catalyst process, line width and blurring can be controlled to within ±3% variation. Following the IPC 6013 standard for flexible electronics, the results after thermal cycling (288 °C, 6 times) and a hot oil test (260 °C, 3 times) indicated that the metallic circuit had retained excellent adhesion properties and electric characteristics. We also report the first successful demonstration of a metal film in a via‐hole inner wall on a flexible substrate. This novel fabrication method is ideal for the realization of large area, flexible electronics and future multilayer flexible substrate application, such as flexible display, chip on flexible substrate, etc., particularly where traditional lithographic processes can not be applied. Flexible high‐density circuit on an FR‐4 substrate (left) and picture of via hole with copper inner wall (right). magnified imageFlexible high‐density circuit on an FR‐4 substrate (left) and picture of via hole with copper inner wall (right).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Drying-Mediated Self-Assembly of Nanoparticles
Rabani, E., Reichman, D. R., Geissler, P. L., & Brus, L. E. (2003) · Nature · doi:10.1038/nature02087 · Cited by 913
Cited by
High-resolution electrohydrodynamic jet printing
Park, J.-U., Hardy, M., Kang, S. J., Barton, K., Adair, K., Mukhopadhyay, D. K., Lee, C. Y., Strano, M. S., Alleyne, A. G., Georgiadis, J. G., et al. (2007) · Nature Materials · doi:10.1038/nmat1974 · Cited by 1,492
Inorganic Semiconductors for Flexible Electronics
Sun, Y., & Rogers, J. A. (2007) · Advanced Materials · doi:10.1002/adma.200602223 · Cited by 874
Micro- and Nanopatterning Techniques for Organic Electronic and Optoelectronic Systems
Menard, E., Meitl, M. A., Sun, Y., Park, J.-U., Shir, D. J.-L., Nam, Y.-S., Jeon, S., & Rogers, J. A. (2007) · Chemical Reviews · doi:10.1021/cr050139y · Cited by 658
Plating on acrylonitrile–butadiene–styrene (ABS) plastic: a review
Olivera, S., Muralidhara, H. B., Venkatesh, K., Gopalakrishna, K., & Vivek, C. S. (2016) · Journal of Materials Science · doi:10.1007/s10853-015-9668-7 · Cited by 313
Metadata
- Authors
- Cheng, K., Yang, M., Chiu, W. W. W., Huang, C., Chang, J., Ying, T., & Yang, Y.
- Venue
- Macromolecular Rapid Communications
- Publisher
- Wiley
- Published
- 2005-02-07
- Volume
- 26
- Issue
- 4
- Pages
- 247-264
- ISSN
- 1022-1336 (ISSN-L)
- 1521-3927
- OpenAlex
- W2082857536
- Cited by
- 184
- References
- 1
- FWCI
- 9.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ink‐Jet Printing, Self‐Assembled Polyelectrolytes, and Electroless Plating: Low Cost Fabrication of Circuits on a Flexible Substrate at Room Temperature. https://app.cochat.ai/papers/10.1002/marc.200400462
- The paper
- Cheng, K., Yang, M., Chiu, W. W. W., Huang, C., Chang, J., Ying, T., & Yang, Y. (2005). Ink‐Jet Printing, Self‐Assembled Polyelectrolytes, and Electroless Plating: Low Cost Fabrication of Circuits on a Flexible Substrate at Room Temperature. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.200400462
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.