The DOI matches its Crossref record.
Polymer Nanostructures by Forced Assembly: Process, Structure, and Properties
Abstract
The process of micro‐ and nanolayer coextrusion of polymeric systems with good layer uniformity is described. Coextrusion through a series of layer multiplying die elements has enabled the production of films containing tens to thousands of layers with individual layer thicknesses from the micro‐ to the nanoscale. Improvements in layer uniformity are discussed through optimization of layer multiplier die design, selection of viscosity matched polymer systems, and incorporation of surface layer capabilities. Design of ‘uneven’ split layer multiplication dies has enabled the coextrusion of layered films with a wide variety of layer thickness distributions having up to a 10× difference in the individual film layer thicknesses. Coextrusion of layered polymer films with individual layer thicknesses down to the nanoscale has resulted in the production of novel systems with improved properties. Nanolayered polymer films were utilized to develop an all‐plastic polymer laser, to fabricate gradient refractive index lenses, and to investigate gas barrier enhancement of crystalline polymer nanolayers confined to induce a high aspect ratio, in‐plane, single‐crystal‐like lamellar structure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Mechanical properties of graphene and graphene-based nanocomposites
Papageorgiou, D. G., Kinloch, I. A., & Young, R. J. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.07.004 · Cited by 2,579
Zhang, X., Xu, Y., Zhang, X., Wu, H., Shen, J., Chen, R., Xiong, Y., Li, J., & Guo, S. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.10.002 · Cited by 325
50th Anniversary Perspective: Dielectric Phenomena in Polymers and Multilayered Dielectric Films
Baer, E., & Zhu, L. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b02669 · Cited by 325
Self-citationRecent Advances in Multilayer‐Structure Dielectrics for Energy Storage Application
Feng, M., Feng, Y., Zhang, T., Li, J., Chen, Q., Chi, Q., & Lei, Q. (2021) · Advanced Science · doi:10.1002/advs.202102221 · Cited by 290
Refractive index measurements of poly(methyl methacrylate) (PMMA) from 04–16 μm
Beadie, G., Brindza, M., Flynn, R. A., Rosenberg, A., & Shirk, J. S. (2015) · Applied Optics · doi:10.1364/ao.54.00f139 · Cited by 260
Metadata
- Authors
- Ponting, M., Hiltner, A., & Baer, E.
- Venue
- Macromolecular Symposia
- Publisher
- Wiley
- Published
- 2010-08
- Volume
- 294
- Issue
- 1
- Pages
- 19-32
- ISSN
- 1022-1360 (ISSN-L)
- 1521-3900
- OpenAlex
- W2168561959
- Cited by
- 159
- References
- 0
- FWCI
- 6.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Polymer Nanostructures by Forced Assembly: Process, Structure, and Properties. https://app.cochat.ai/papers/10.1002/masy.201050803
- The paper
- Ponting, M., Hiltner, A., & Baer, E. (2010). Polymer Nanostructures by Forced Assembly: Process, Structure, and Properties. Macromolecular Symposia. https://doi.org/10.1002/masy.201050803
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.