The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Discrete element modeling of tool‐rock interaction I: rock cutting
Open accessAbstract
SUMMARY: Tool‐rock interaction processes can be classified as indentation or cutting depending on the direction of motion of the tool with respect to the rock surface. The modes of failure induced in the rock by an indenting or a cutting tool can be ductile and/or brittle. The ductile mode is associated with the development of a damage zone, whereas the brittle mode involves the growth of macrocracks. This is the first part of a series of two papers concerned with an analysis of the cutting and the indentation processes based on using the discrete element method. In this paper, numerical simulations of the cutting process are conducted to reproduce the transition from a ductile to a brittle failure mode with increasing depth of cut, which is observed in experiments. The numerical results provide evidence that the critical depth of cut d * controlling the failure mode transition is related to the characteristic length ℓ = (KIc ∕ σc)2 with KIc denoting the material toughness and σc its unconfined compressive strength. The nature of frictional contact between the cutter face and the rock in the ductile failure mode is also examined. It is shown that the inclination of the total cutting force is controlled by a multi‐directional flow mechanism ahead of the cutter that is related to the formation of a wedge of failed material, intermittently adhering to the cutter. As a result, the inclination of the total cutting force varies with the rake angle of the cutter and cannot be considered an intrinsic measure of the interfacial friction between the cutter and the rock. Copyright © 2012 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
A bonded-particle model for rock
Potyondy, D. O., & Cundall, P. A. (2004) · International Journal of Rock Mechanics and Mining Sciences · doi:10.1016/j.ijrmms.2004.09.011 · Cited by 5,034
Micromechanics: Overall Properties of Heterogeneous Materials
Nemat-Nasser, S., Lori, M., & Datta, S. K. (1996) · Journal of Applied Mechanics · doi:10.1115/1.2788912 · Cited by 2,202
The correlation of indentation experiments
Johnson, K. L. (1970) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(70)90029-3 · Cited by 1,401
Indentation fracture: principles and applications
Lawn, B., & Wilshaw, R. (1975) · Journal of Materials Science · doi:10.1007/bf00823224 · Cited by 1,321
Oñate, E., & Rojek, J. (2004) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2003.12.056 · Cited by 289
Numerical simulation of rock cutting using the discrete element method
Su, O., & Ali Akcin, N. (2011) · International Journal of Rock Mechanics and Mining Sciences · doi:10.1016/j.ijrmms.2010.08.012 · Cited by 245
Deformation and failure of granular materials.
Matsuoka, H. (1988) · Journal of the Society of Powder Technology Japan · doi:10.4164/sptj.25.462 · Cited by 192
Packing Structure and Mechanical Properties of Granulates
Chang, C. S., & Misra, A. K. (1990) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1990)116:5(1077 · Cited by 130
Large-scale elastic-plastic indentation simulations via nonequilibrium molecular dynamics
Hoover, W. G., Groot, A. J. D., Hoover, C. G., Stowers, I. F., Kawai, T., Holian, B. L., Boku, T., Ihara, S., & Belak, J. F. (1990) · Physical Review A · doi:10.1103/physreva.42.5844 · Cited by 79
Cited by
Numerical methods for hydraulic fracture propagation: A review of recent trends
Lecampion, B., Bunger, A., & Zhang, X. (2018) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2017.10.012 · Cited by 467
Self-citationShimizu, H., Murata, S., & Ishida, T. (2011) · International Journal of Rock Mechanics and Mining Sciences · doi:10.1016/j.ijrmms.2011.04.013 · Cited by 398
Effect of Model Scale and Particle Size Distribution on PFC3D Simulation Results
Ding, X., Zhang, L., Zhu, H., & Zhang, Q. (2014) · Rock Mechanics and Rock Engineering · doi:10.1007/s00603-013-0533-1 · Cited by 300
A Study of Three Intrinsic Problems of the Classic Discrete Element Method Using Flat-Joint Model
Wu, S., & Xu, X. (2016) · Rock Mechanics and Rock Engineering · doi:10.1007/s00603-015-0890-z · Cited by 274
Metadata
- Authors
- Huang, H., Lecampion, B., & Detournay, E.
- Venue
- International Journal for Numerical and Analytical Methods in Geomechanics
- Publisher
- Wiley
- Published
- 2012-08-06
- Volume
- 37
- Issue
- 13
- Pages
- 1913-1929
- ISSN
- 0363-9061 (ISSN-L)
- 1096-9853
- OpenAlex
- W1909283056
- Cited by
- 295
- References
- 10
- FWCI
- 29.78
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.