The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Differential scanning calorimetry studies on poly(ethylene glycol) with different molecular weights for thermal energy storage materials
Abstract
Melting and crystallization behaviour of poly(ethylene glycol) (PEG) with different molecular weights (from 1000 to 35 000) and chosen blends of PEG is investigated by means of differential scanning calorimetry (DSC) operating in dynamic mode at different heating rates. The influence of the molecular weight of PEG on its melting point and enthalpy of fusion is evaluated; from the DSC data the degree of crystallinity is calculated–it is found that there is an increased tendency of higher‐molecular‐weight PEGs towards the formation of crystalline phase owing to their lower segmental mobility and more convenient geometrical alignment. During the freezing cycle, an increase in the molecular weight of PEG causes an increase in the solidification temperature and heat of crystallization. Thermal transition data are supplemented by optical microscopy–numerous small sphere‐shaped crystalline structures are observed to join together and impinge on their neighbours, forming eventually a multilayered lamellar texture. By implementing second polymeric component the polydispersity of the system increases, thus lowering the crystallization degree during preparation phase. It influences also the course of solidification by lowering the crystallization temperature, T c. An additional effect observed in the case of the blend's freezing is associated with larger supercooling, probably due to morphological constraints and entanglements in interlamellar regions. The possible advantage of using PEG blends to replace pure components is connected with the possibility of changing the temperature range and heat associated with melting/freezing. Copyright © 2003 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hoffman, J. D., & Miller, R. L. (1997) · Polymer · doi:10.1016/s0032-3861(97)00071-2 · Cited by 1,065
Verma, R., Marand, H., & Hsiao, B. (1996) · Macromolecules · doi:10.1021/ma951727o · Cited by 262
Microstructure of Melt-Miscible, Semicrystalline Polymer Blends
Talibuddin, S., Wu, L., Runt, J., & Lin, J. S. (1996) · Macromolecules · doi:10.1021/ma960508f · Cited by 158
Thermal degradation of poly(ethyleneglycol)
Han, S., Kim, C., & Kwon, D.-S. (1995) · Polymer Degradation and Stability · doi:10.1016/0141-3910(94)00109-l · Cited by 146
Low chain esters of stearic acid as phase change materials for thermal energy storage in buildings
Feldman, D. G., Banu, D., & Hawes, D. W. (1995) · Solar Energy Materials and Solar Cells · doi:10.1016/0927-0248(94)00186-3 · Cited by 128
Isothermal Crystallization of Poly(ε-caprolactone−ethylene glycol) Block Copolymers
Bogdanov, B. G., Vidts, A., Schacht, E. H., & Berghmans, H. (1999) · Macromolecules · doi:10.1021/ma980226a · Cited by 116
Cited by
Phase change materials for thermal energy storage
Pielichowska, K., & Pielichowski, K. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.005 · Cited by 2,106
Self-citationPhase change materials for smart textiles – An overview
Mondal, S. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.08.009 · Cited by 1,171
Karaman, S., Karaipekli, A., Sarı, A., & Biçer, A. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.022 · Cited by 687
Wu, M. Q., Wu, S., Cai, Y. F., Wang, R. Z., & Li, T. X. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.07.019 · Cited by 409
An intrinsically flexible phase change film for wearable thermal managements
Kou, Y., Sun, K., Luo, J., Zhou, F., Huang, H., Wu, Z.-S., & Shi, Q. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.014 · Cited by 318
Metadata
- Authors
- Pielichowski, K., & Flejtuch, K.
- Venue
- Polymers for Advanced Technologies
- Publisher
- Wiley
- Published
- 2002-10
- Volume
- 13
- Issue
- 10-12
- Pages
- 690-696
- ISSN
- 1042-7147 (ISSN-L)
- 1099-1581
- OpenAlex
- W2157798571
- Cited by
- 330
- References
- 6
- FWCI
- 8.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.