The DOI matches its Crossref record.
The thermal degradation of poly(methyl methacrylate) nanocomposites with montmorillonite, layered double hydroxides and carbon nanotubes
Abstract
The thermal degradation of poly(methyl methacrylate) and its nanocomposite has been studied to determine if the presence of clays (anionic and cationic) or carbon nanotubes has an effect on the degradation pathway. Nanocomposite formation has been established by X‐ray diffraction and transmission electron microscopy, thermal degradation has been investigated by cone calorimetry and thermogravimetric analysis (TGA), and the products of degradation have been studied with TGA/FT‐IR and gas chromatography/mass spectrometry (GC/MS). There are no marked differences in the degradation products of the polymer and its nanocomposites, but the degradation of the nanocomposite occurs at higher temperatures. The most likely explanation is that poly(methyl methacrylate) degrades by only a single route, so the clay cannot promote one pathway at the expense of another. This observation bears important implications for the barrier mechanism, which is currently used to explain the reduction in the peak heat release rate of nanocomposites. Copyright © 2006 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Graphene Annealing: How Clean Can It Be?
Lin, Y.-C., Lu, C.-C., Yeh, C.-H., Jin, C., Suenaga, K., & Chiu, P.-W. (2012) · Nano Letters · doi:10.1021/nl203733r · Cited by 949
Nanoscale particles for polymer degradation and stabilization—Trends and future perspectives
Kumar, A. P., Depan, D., Singh Tomer, N., & Singh, R. P. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.01.002 · Cited by 680
Synthetic, layered nanoparticles for polymeric nanocomposites (PNCs)
Utracki, L. A., Sepehr, M., & Boccaleri, E. (2007) · Polymers for Advanced Technologies · doi:10.1002/pat.852 · Cited by 395
2D boron nitride nanosheets for polymer composite materials
Rasul, M. G., Kiziltas, A., Arfaei, B., & Shahbazian-Yassar, R. (2021) · npj 2D Materials and Applications · doi:10.1038/s41699-021-00231-2 · Cited by 332
Polymer/montmorillonite nanocomposites with improved thermal properties
Leszczyńska, A., Njuguna, J., Pielichowski, K., & Banerjee, J. R. (2007) · Thermochimica Acta · doi:10.1016/j.tca.2006.11.003 · Cited by 315
Ma, H., Tong, L., Xu, Z., & Fang, Z. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200700677 · Cited by 252
Bone cement based nanohybrid as a super biomaterial for bone healing
Kapusetti, G., Misra, N., Singh, V., Srivastava, S., Roy, P., Dana, K., & Maiti, P. (2014) · J. Mater. Chem. B · doi:10.1039/c4tb00501e · Cited by 39
Metadata
- Authors
- Costache, M. C., Wang, D., Heidecker, M. J., Manias, E., & Wilkie, C. A.
- Venue
- Polymers for Advanced Technologies
- Publisher
- Wiley
- Published
- 2006-01-16
- Volume
- 17
- Issue
- 4
- Pages
- 272-280
- ISSN
- 1042-7147 (ISSN-L)
- 1099-1581
- OpenAlex
- W2165161995
- Cited by
- 215
- References
- 0
- FWCI
- 16.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.