The DOI matches its Crossref record.
Interfacial shear strength studies using the single‐filament‐composite test. Part II: A probability model and Monte Carlo simulation
Abstract
A Monte Carlo simulation is developed to provide a foundation for interpreting experimental data from the single‐filament‐composite test. The main focus is on developing an improved procedure for arriving at a realistic value for the shear strength of the fiber‐matrix interface, but it is also shown how the test may be used to characterize the strength distribution of fibers at a length scale much shorter than is achievable in standard tension tests. The simulation is based on the widely used Poisson/Weibull probability model for fiber failure that characterizes the strength in terms of the random flaws distributed along the fiber. The primary mechanical model for stress buildup at the fiber end is the same as that assumed by most authors and assumes a constant interfacial shear stress in this shear transfer zone reminiscent of a yielding plastic matrix. We also, however, consider a bilinear model that allows for a zone of debonding with a constant shear stress lower than in the primary “plastic” zone. Simulation results are cast in terms of nondimensional variables and tabulated to allow for wide applicability. Sample size and confidence interval issues are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The physics and mechanics of fibre-reinforced brittle matrix composites
Evans, A. G., & Zok, F. W. (1994) · Journal of Materials Science · doi:10.1007/bf00355946 · Cited by 646
Comparison of methods for the measurement of fibre/matrix adhesion in composites
Herrera-Franco, P. J., & Drzal, L. T. (1992) · Composites · doi:10.1016/0010-4361(92)90282-y · Cited by 553
ZHANDAROV, S. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.07.003 · Cited by 457
Size effects in the distribution for strength of brittle matrix fibrous composites
Phoenix, S. L., Ibnabdeljalil, M., & Hui, C.-Y. (1997) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(96)00034-0 · Cited by 144
Self-citation
Metadata
- Authors
- Henstenburg, R. B., & Phoenix, S. L.
- Venue
- Polymer Composites
- Publisher
- Wiley
- Published
- 1989-12
- Volume
- 10
- Issue
- 6
- Pages
- 389-408
- ISSN
- 0272-8397 (ISSN-L)
- 1548-0569
- OpenAlex
- W2015993750
- Cited by
- 217
- References
- 0
- FWCI
- 14.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.