The DOI matches its Crossref record.
Development of renewable resource–based cellulose acetate bioplastic: Effect of process engineering on the performance of cellulosic plastics
Abstract
This paper deals with the development of a cellulose acetate biopolymer. Plasticization of this biopolymer under varying processing conditions to make it a suitable matrix polymer for bio‐composite applications was studied. In particular, cellulose acetate was plasticized with varying concentrations of an eco‐friendly triethyl citrate (TEC) plasticizer, unlike a conventional, petroleum‐derived phthalate plasticizer. Three types of processing were used to fabricate plasticized cellulose acetate parts: compression molding, extrusion followed by compression molding, and extrusion followed by injection molding. The processing mode affected the physicomechanical and thermal properties of the cellulosic plastic. Compression molded samples exhibited the highest impact strength, tending towards the impact strength of a thermoplastic olefin (TPO), while samples that were extruded and then injection molded exhibited the highest tensile strength and modulus values. Increasing the plasticizer content in the cellulosic plastic formulation improved the impact strength and strain to failure while decreasing the tensile strength and modulus values. The coefficient of thermal expansion (CTE) of the cellulose acetate increased with increasing amounts of plasticizer. Plasticized cellulose acetate was found to be processable at 170–180°C, approximately 50°C below the melting point of neat cellulose acetate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Mechanistic implications of plastic degradation
Singh, B., & Sharma, N. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.11.008 · Cited by 1,569
Progress in bio-based plastics and plasticizing modifications
Mekonnen, T., Mussone, P., Khalil, H., & Bressler, D. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12555f · Cited by 831
Bogoeva‐Gaceva, G., Avella, M., Malinconico, M., Buzarovska, A., Grozdanov, A., Gentile, G., & Errico, M. E. (2007) · Polymer Composites · doi:10.1002/pc.20270 · Cited by 521
Rudnik, E. (2008) · Compostable Polymer Materials · doi:10.1016/b978-008045371-2.50005-6 · Cited by 468
Metadata
- Authors
- Mohanty, A. K., Wibowo, A., Misra, M., & Drzal, L. T.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2003-05
- Volume
- 43
- Issue
- 5
- Pages
- 1151-1161
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2045838112
- Cited by
- 162
- References
- 0
- FWCI
- 1.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development of renewable resource–based cellulose acetate bioplastic: Effect of process engineering on the performance of cellulosic plastics. https://app.cochat.ai/papers/10.1002/pen.10097
- The paper
- Mohanty, A. K., Wibowo, A., Misra, M., & Drzal, L. T. (2003). Development of renewable resource–based cellulose acetate bioplastic: Effect of process engineering on the performance of cellulosic plastics. Polymer Engineering & Science. https://doi.org/10.1002/pen.10097
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.