The DOI matches its Crossref record.
Extrusion of polystyrene nanocomposite foams with supercritical CO2
Abstract
Intercalated and exfoliated polystyrene/nano‐clay composites were prepared by mechanical blending and in situ polymerization respectively. The composites were then foamed by using CO 2 as the foaming agent in an extrusion foaming process. The resulting foam structure is compared with that of pure polystyrene and polystyrene/talc composite. At a screw rotation speed of 10 rpm and a die temperature of 200°C, the addition of a small amount (i.e., 5 wt%) of intercalated nano‐clay greatly reduces cell size from 25.3 to 11.1 μm and increases cell density from 2.7 × 10 7 to 2.8 × 10 8 cells/cm 3. Once exfoliated, the nanocomposite exhibits the highest cell density (1.5 × 10 9 cells/cm 3) and smallest cell size (4.9 μm) at the same particle concentration. Compared with polystyrene foams, the nanocomposite foams exhibit higher tensile modulus, improved fire retardance, and better barrier property. Combining nanocomposites and the extrusion foaming process provides a new technique for the design and control of cell structure in microcellular foams.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Nalawade, S. P., Picchioni, F., & Janssen, L. P. B. M. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2005.08.002 · Cited by 670
Nofar, M., & Park, C. B. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.04.001 · Cited by 531
Polyurethane/clay nanocomposites foams: processing, structure and properties
Cao, X., James Lee, L., Widya, T., & Macosko, C. (2005) · Polymer · doi:10.1016/j.polymer.2004.11.028 · Cited by 496
Sauceau, M., Fages, J., Common, A., Nikitine, C., & Rodier, E. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.12.004 · Cited by 449
Duarte, M. M., Silva, I. V., Eisenhut, A. R., Bionda, N., Duarte, A. R. C., & Oliveira, A. L. (2022) · Materials Horizons · doi:10.1039/d1mh01720a · Cited by 45
Metadata
- Authors
- Han, X., Zeng, C., Lee, L. J., Koelling, K. W., & Tomasko, D. L.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2003-06
- Volume
- 43
- Issue
- 6
- Pages
- 1261-1275
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2165690307
- Cited by
- 228
- References
- 0
- FWCI
- 8.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Extrusion of polystyrene nanocomposite foams with supercritical CO2. https://app.cochat.ai/papers/10.1002/pen.10107
- The paper
- Han, X., Zeng, C., Lee, L. J., Koelling, K. W., & Tomasko, D. L. (2003). Extrusion of polystyrene nanocomposite foams with supercritical CO2. Polymer Engineering & Science. https://doi.org/10.1002/pen.10107
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.