The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
The essential fracture work concept for toughness measurement of ductile polymers
Abstract
The essential work of fracture method is explored. The method was used to determine the fracture toughness of a series of toughened polymer blends and the crack resistance of a thin ductile polymer film, which could not be tested using the J ‐integral method. A comparison between J ‐integral and the specific essential work of fracture was carried out to test the equivalence of the two methods. The effects of geometry on the essential work of fracture and the plane‐stress/plane‐strain transition were studied. It has been shown that the specific essential work of fracture is a material constant, independent of sample geometry, and equivalent to the critical J ‐integral. The plane‐stress/plane‐strain transition is found to depend on the nature of the material tested. The sample thickness requirement for valid plane‐strain specific essential work of fracture is discussed, and it is proposed that the size requirement for the plane‐strain specific essential work of fracture may be less rigorous than that for plane‐strain J IC measurement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rice, J. R. (1968) · Journal of Applied Mechanics · doi:10.1115/1.3601206 · Cited by 8,421
Annual Book of ASTM Standards 2003
Riyanto, L. (2003) · Cited by 5,334
The essential work of plane stress ductile fracture
Cotterell, B., & Reddel, J. K. (1977) · International Journal of Fracture · doi:10.1007/bf00040143 · Cited by 519
Fracture Mechanics of Polymers
Bailey, J. E. (1985) · Composites · doi:10.1016/0010-4361(85)90660-3 · Cited by 514
On the essential work of ductile fracture in polymers
Mai, Y., & Cotterell, B. (1986) · International Journal of Fracture · doi:10.1007/bf00019787 · Cited by 425
Self-citationCrack-growth criteria and non-linear fracture mechanics
Broberg, K. B. (1971) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(71)90008-1 · Cited by 268
Saleemi, A. S., & Nairn, J. A. (1990) · Polymer Engineering and Science · doi:10.1002/pen.760300404 · Cited by 114
Cited by
Effect of fiber diameter on tensile properties of electrospun poly(ɛ-caprolactone)
Wong, S.-C., Baji, A., & Leng, S. (2008) · Polymer · doi:10.1016/j.polymer.2008.08.022 · Cited by 528
What's Inside the Box? – Length‐Scales that Govern Fracture Processes of Polymer Fibers
Giesa, T., Pugno, N. M., Wong, J. Y., Kaplan, D. L., & Buehler, M. J. (2014) · Advanced Materials · doi:10.1002/adma.201303323 · Cited by 47
Metadata
- Authors
- Wu, J., & Mai, Y.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 1996-09
- Volume
- 36
- Issue
- 18
- Pages
- 2275-2288
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2001699740
- Cited by
- 265
- References
- 7
- FWCI
- 14.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.