NIR, DSC, and FTIR as quantitative methods for compositional analysis of blends of polymers obtained from recycled mixed plastic waste
The DOI matches its Crossref record.
Abstract
Methods for the determination of the composition of two binary blends in mixtures of recycled polymeric materials were analyzed and compared. Recycled polypropylene/polyethylene (PP/HDPE) and recycled poly(acryl‐butadiene‐styrene) and polypropylene(ABS/PP) were used to develop and validate the methods. Diffuse reflectance near infrared spectroscopy (NIRS) offers high sensitivity and ease of operation and a possibility to perform multivariate data analysis. In comparison, differential scanning calorimetry (DSC) and Mid‐IR, which are commonly used for this purpose require certain sample preparation and are indeed time consuming. In addition, the low sensitivity of these two methods to concentrations lower than 1% wt makes their application in quality control of recycled polymers inappropriate. NIR can be used for estimating the composition of the recyclate on‐line in only a few seconds, no sample preparation is required, and high precision is achieved. We obtained a root mean square error of prediction (RMSEP) equal to 0.21% wt in the interval from 0‐15% wt of PP in HDPE and a RMSEP equal to 0.91% wt in the interval 0‐100%. For blends of PP/ABS a RMSEP of 0.74% wt in the range 0‐100% and 0.32% wt in the range 0‐15% wt PP was calculated. Most of the variation in the spectral data with respect to the polymer blend composition for all the studied blends were explained by two principal components (PC). The optimal number of factors (PC) was determined by cross‐validation analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Chemical and biological catalysis for plastics recycling and upcycling
Ellis, L. D., Rorrer, N. A., Sullivan, K. P., Otto, M., McGeehan, J. E., Román-Leshkov, Y., Wierckx, N., & Beckham, G. T. (2021) · Nature Catalysis · doi:10.1038/s41929-021-00648-4 · Cited by 1,201
Majewsky, M., Bitter, H., Eiche, E., & Horn, H. (2016) · Science of The Total Environment · doi:10.1016/j.scitotenv.2016.06.017 · Cited by 432
Quality concepts for the improved use of recycled polymeric materials: a review
Vilaplana, F., & Karlsson, S. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200700393 · Cited by 414
Self-citationPlastic waste from recycling centres: characterisation and evaluation of plastic recyclability
Faraca, G., & Astrup, T. (2019) · Waste Management · doi:10.1016/j.wasman.2019.06.038 · Cited by 370
Solvent-based separation and recycling of waste plastics: A review
Zhao, Y.-B., Lv, X.-D., & Ni, H.-G. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.06.095 · Cited by 367
Kusenberg, M., Eschenbacher, A., Djokic, M. R., Zayoud, A., Ragaert, K., De Meester, S., & Van Geem, K. M. (2022) · Waste Management · doi:10.1016/j.wasman.2021.11.009 · Cited by 319
Assessment of plastic packaging waste: material origin, methods, properties
Luijsterburg, B., & Goossens, H. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.10.010 · Cited by 198
Metadata
- Authors
- Camacho, W., & Karlsson, S.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2001-09
- Volume
- 41
- Issue
- 9
- Pages
- 1626-1635
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2158469645
- Cited by
- 111
- References
- 0
- FWCI
- 1.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.