The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Foam processing and cellular structure of polypropylene/clay nanocomposites
Abstract
Polypropylene (PP)/clay nanocomposites (PPCNs) were autoclave‐foamed in a batch process. Foaming was performed using supercritical CO 2 at 10 MPa, within the temperature range from 130.6°C to 143.4°C, i.e., below the melting temperature of either PPCNs or maleic anhydride‐modified PP (PP‐MA) matrix without clay. The foamed PP‐MA and PPCN2 (prepared at 130.6°C and containing 2 wt% clay) show closed cell structures with pentagonal and/or hexagonal faces, while foams of PPCN4 and PPCN7.5 (prepared at 143.4°C, 4 and 7.5 wt% clay) had spherical cells. Scanning electron microscopy confirmed that foamed PPCNs had high cell density of 10 7–10 8 cells/mL, cell sizes in the range of 30–120 μm, cell wall thicknesses of 5–15 μm, and low densities of 0.05–0.3 g/mL. Interestingly, transmission electron microscopic observations of the PPCNs' cell structure showed biaxial flow‐induced alignment of clay particles along the cell boundary. In this paper, the correlation between foam structure and rheological properties of the PPCNs is also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A hierarchical structure and properties of intercalated polypropylene/clay nanocomposites
Nam, P. H., Maiti, P., Okamoto, M., Kotaka, T., Hasegawa, N., & Usuki, A. (2001) · Polymer · doi:10.1016/s0032-3861(01)00512-2 · Cited by 502
Self-citationHandbook of polymeric foams and foam technology
Mills, N. J. (1993) · Polymer · doi:10.1016/0032-3861(93)90758-3 · Cited by 412
A House of Cards Structure in Polypropylene/Clay Nanocomposites under Elongational Flow
Okamoto, M., Nam, P. H., Maiti, P., Kotaka, T., Hasegawa, N., & Usuki, A. (2001) · Nano Letters · doi:10.1021/nl0100163 · Cited by 302
Self-citationBiaxial Flow-Induced Alignment of Silicate Layers in Polypropylene/Clay Nanocomposite Foam
Okamoto, M., Nam, P. H., Maiti, P., Kotaka, T., Nakayama, T., Takada, M., Ohshima, M., Usuki, A., Hasegawa, N., & Okamoto, H. (2001) · Nano Letters · doi:10.1021/nl010051+ · Cited by 275
Self-citationFoam Extrusion: Principles and Practice
(2000) · CRC Press eBooks · doi:10.1201/9781420014129 · Cited by 214
Microcellular Foaming of Amorphous High-Tg Polymers Using Carbon Dioxide
Krause, B., Mettinkhof, R., van der Vegt, N. F. A., et al. (2001) · Macromolecules · doi:10.1021/ma001291z · Cited by 186
Mechanical Properties of Plastic Foams
Chan, R. K. S., & Nakamura, M. (1969) · Journal of Cellular Plastics · doi:10.1177/0021955x6900500207 · Cited by 78
Kotaka, T., Kojima, A., & Okamoto, M. (1997) · Rheologica Acta · doi:10.1007/bf00367361 · Cited by 55
Self-citation
Cited by
Polymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Self-citationA review on polymer–layered silicate nanocomposites
Pavlidou, S., & Papaspyrides, C. D. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.008 · Cited by 2,526
Hussain, F., Hojjati, M., Okamoto, M., & Gorga, R. E. (2006) · Journal of Composite Materials · doi:10.1177/0021998306067321 · Cited by 2,227
Self-citationSINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Structural and mechanical properties of polymer nanocomposites
Tjong, S. C. (2006) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2006.06.001 · Cited by 1,531
Ray, S. S., & Okamoto, M. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200300008 · Cited by 454
Self-citationPorous Materials and Supercritical Fluids
Cooper, A. I. (2003) · Advanced Materials · doi:10.1002/adma.200300380 · Cited by 389
Functionalized graphene sheet filled silicone foam nanocomposites
Verdejo, R., Barroso-Bujans, F., Rodriguez-Perez, M. A., Antonio de Saja, J., & Lopez-Manchado, M. A. (2008) · Journal of Materials Chemistry · doi:10.1039/b718289a · Cited by 364
New Polylactide/Layered Silicate Nanocomposites, 6
Sinha Ray, S., & Okamoto, M. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200300156 · Cited by 333
Self-citationPoly(lactic acid)/organoclay nanocomposites: Thermal, rheological properties and foam processing
Di, Y., Iannace, S., Maio, E. D., & Nicolais, L. (2005) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20366 · Cited by 257
Metadata
- Authors
- Nam, P. H., Maiti, P., Okamoto, M., Kotaka, T., Nakayama, T., Takada, M., Ohshima, M., Usuki, A., Hasegawa, N., & Okamoto, H.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2002-09
- Volume
- 42
- Issue
- 9
- Pages
- 1907-1918
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2003951261
- Cited by
- 261
- References
- 8
- FWCI
- 10.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.