The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Nonlinear mechanical response of high density polyethylene. Part II: Uniaxial constitutive modeling
Abstract
Based on the experimental data presented in Part I, two uniaxial constitutive models are constructed. The first, a nonlinear viscoelastic (NVE) model, is formulated using the mechanical analogy consisting of one independent spring and six Kelvin elements in series. Creep data are used to determine the model parameters. The second model, a viscoplastic (VP) formulation, is developed using the viscoplastic theory proposed by Bodner to characterize the uniaxial viscoplastic behavior of metals. Inelastic strain rate is introduced into the state variable in addition to inelastic work to depict the strong rate dependent behavior of HDPE. Experimental data from constant strain rate tests are employed to construct the material functions of the model. Limitations in the application of each model are discussed in conjunction with possibilities for future work.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Large inelastic deformation of glassy polymers. part I: rate dependent constitutive model
Boyce, M. C., Parks, D. M., & Argon, A. S. (1988) · Mechanics of Materials · doi:10.1016/0167-6636(88)90003-8 · Cited by 1,110
A theory for the low-temperature plastic deformation of glassy polymers
Argon, A. S. (1973) · Philosophical Magazine · doi:10.1080/14786437308220987 · Cited by 801
Cited by
Ayoub, G., Zaïri, F., Naït-Abdelaziz, M., & Gloaguen, J. M. (2010) · International Journal of Plasticity · doi:10.1016/j.ijplas.2009.07.005 · Cited by 252
Metadata
- Authors
- Zhang, C., & Moore, I. D.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 1997-02
- Volume
- 37
- Issue
- 2
- Pages
- 414-420
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W1981151361
- Cited by
- 175
- References
- 2
- FWCI
- 3.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.