The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Biofiber‐reinforced polypropylene composites
Abstract
Biofibers, natural lignocellulosics, have an outstanding potential as a reinforcement in thermoplastics. This study deals with the preparation of lignocellulosic composites by reactive extrusion processing in which good interfacial adhesion is generated by a combination of fiber modification and matrix modification methods. PP matrix was modified by reacting with maleic anhydride and subsequently bonded to the surface of the modified lignocellulosic component, in‐situ. The fiber surface was modified by reacting it with a silane in a simple and quick aqueous reaction system, similar to that employed for glass fibers. The modified fibers are then extruded with the modified polymer matrix to form the compatibilized composite. The various reactions between the lignocellulosic fiber/filler and modified polymer chains, is expected to improve the interfacial adhesion significantly as opposed to simple mixing of the two components, since new covalent bonds between the fiber surface and matrix are created in the former case. These composite blends were then injection molded for mechanical characterization. Typical mechanical tests on strength, toughness and Izod impact energy were performed and the results are reported. These findings are discussed in view of the improved adhesion resulting from reactions and enhanced polar interactions at phase boundaries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Emerging Technologies for Materials and Chemicals from Biomass
Rowell, R. M., Schultz, T. P., & Narayan, R. (1992) · ACS symposium series · doi:10.1021/bk-1992-0476 · Cited by 135
Self-citationInterfacial adhesion of lignocellulosic materials in polymer composites: an overview
Maldas, D., & Kokta, B. V. (1993) · Composite Interfaces · doi:10.1163/156855493x00338 · Cited by 81
Biomass (Renewable) Resources for Production of Materials, Chemicals, and Fuels: A Paradigm Shift
Narayan, R. (1992) · ACS symposium series · doi:10.1021/bk-1992-0476.ch001 · Cited by 64
Self-citationCompatibilization of Biomass Fibers with Hydrophobic Materials
Krishnan, M. R., & Narayan, R. (1992) · MRS Proceedings · doi:10.1557/proc-266-93 · Cited by 13
Self-citation
Cited by
Characterization and properties of natural fiber polymer composites: A comprehensive review
Sanjay, M. R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S., & Pradeep, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.101 · Cited by 1,652
Kalia, S., Kaith, B. S., & Kaur, I. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21328 · Cited by 1,447
Kenaf fiber reinforced composites: A review
Akil, H. M., Omar, M. F., Mazuki, A. A. M., Safiee, S., Ishak, Z. A. M., & Abu Bakar, A. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.04.008 · Cited by 1,274
Surface modifications of natural fibers and performance of the resulting biocomposites: An overview
Mohanty, A. K., Misra, M., & Drzal, L. T. (2001) · Composite Interfaces · doi:10.1163/156855401753255422 · Cited by 1,072
Meereboer, K. W., Misra, M., & Mohanty, A. K. (2020) · Green Chemistry · doi:10.1039/d0gc01647k · Cited by 965
Metadata
- Authors
- Karnani, R., Krishnan, M., & Narayan, R.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 1997-02
- Volume
- 37
- Issue
- 2
- Pages
- 476-483
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2167838585
- Cited by
- 491
- References
- 4
- FWCI
- 3.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biofiber‐reinforced polypropylene composites. https://app.cochat.ai/papers/10.1002/pen.11691
- The paper
- Karnani, R., Krishnan, M., & Narayan, R. (1997). Biofiber‐reinforced polypropylene composites. Polymer Engineering & Science. https://doi.org/10.1002/pen.11691
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.