The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Mechanical and oxygen barrier properties of organoclay‐polyethylene nanocomposite films
Abstract
An organically modified montmorillonite was compounded with ethylene vinyl acetate copolymer (EVA), low density polyethylene (LDPE), and high density polyethylene (HDPE) in a twin‐screw extruder. The resulting organoclay‐polyethylene nanocomposites were then blown into films. Tensile properties and oxygen permeability of these nanocomposite films were investigated to understand the effects of organoclay on different types of polyethylene. It was found that the clay enhancing effects are function of the matrix. The mechanical and oxygen barrier properties of clay/EVA systems increased with clay loading. Both the tensile modulus and oxygen barrier of EVA doubled at 5 wt% clay. Maleic anhydride grafted polyethylene (MAPE) usually is used as a compatibilizer for LDPE and HDPE‐based nanocomposites. However, the MAPEs were found to weaken the oxygen barrier of the PEs, especially for HDPE. This is believed to be a result of less compactness caused by the large side groups and the increase in polarity of the MAPEs. Incorporating 5 wt% clay improves the oxygen barrier by 30% and the tensile modulus by 37% for the LDPE/MAPE system. Incorporation of clay does not enhance the properties of the HDPE‐based systems, likely due to large domain structure and poor bonding. Halpin–Tsai equation and the tortuous path equation were used to model the tensile modulus and oxygen permeability of the clay/EVA nanocomposite films. POLYM. ENG. SCI., 47:1101–1107, 2007. © 2007 Society of Plastics Engineers
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to Physical Polymer Science
Sperling, L. H. (2005) · doi:10.1002/0471757128 · Cited by 2,917
Cited by
Nanotechnology development in food packaging: A review
Mihindukulasuriya, S. D. F., & Lim, L.-T. (2014) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2014.09.009 · Cited by 622
Potential materials for food packaging from nanoclay/natural fibres filled hybrid composites
Majeed, K., Jawaid, M., Hassan, A., Abu Bakar, A., Abdul Khalil, H. P. S., Salema, A. A., & Inuwa, I. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.10.044 · Cited by 617
Recent advances in polymers and polymer composites for food packaging
Zhang, M., Biesold, G. M., Choi, W., Yu, J., Deng, Y., Silvestre, C., & Lin, Z. (2022) · Materials Today · doi:10.1016/j.mattod.2022.01.022 · Cited by 335
Nano clays and its composites for food packaging applications
Deshmukh, R. K., Hakim, L., Akhila, K., Ramakanth, D., & Gaikwad, K. K. (2023) · International Nano Letters · doi:10.1007/s40089-022-00388-8 · Cited by 70
Metadata
- Authors
- Zhong, Y., Janes, D., Zheng, Y., Hetzer, M., & De Kee, D.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2007-05-29
- Volume
- 47
- Issue
- 7
- Pages
- 1101-1107
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W1973951622
- Cited by
- 175
- References
- 1
- FWCI
- 9.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical and oxygen barrier properties of organoclay‐polyethylene nanocomposite films. https://app.cochat.ai/papers/10.1002/pen.20792
- The paper
- Zhong, Y., Janes, D., Zheng, Y., Hetzer, M., & De Kee, D. (2007). Mechanical and oxygen barrier properties of organoclay‐polyethylene nanocomposite films. Polymer Engineering & Science. https://doi.org/10.1002/pen.20792
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.