The DOI matches its Crossref record.
Thermal and mechanical degradation during polymer extrusion processing
Abstract
Polymer processing often activates material degradation, which affects to some extent the performance or the life cycle of the obtained products. Polymer degradation is usually evidenced by molecular weight variations as consequence of exposure to high processing temperature and to relevant mechanical stresses. The degrading effects of melt extrusion under different thermo‐mechanical conditions on polymethyl‐methacrylate and polystyrene are investigated. Materials were processed at different temperatures and rates in a single screw extruder and in a capillary rheometer. Processed and as‐received materials were analysed by Gel permeation chromatography, solution viscosity, and melt rheology. Evaluations of molecular weight and rheological behavior changes after processing, as compared with as‐received materials, evidenced the extent of degradation in the different conditions. Experimental analysis was accompanied by finite elements simulation of the polymer flow and heat transmission within the extruder. This allowed an estimation of the expected shear stresses and temperatures distributions, thus indicating potentially critical situations. It was found that the materials processed at the highest rates in extruder presented lowest molecular weight reductions. This was attributed to the shorter residence time in the extruder and to the possibility of wall slip phenomena, which likely reduce the actual shear stress and viscous dissipation in the fast processing conditions. POLYM. ENG. SCI., 47:1813–1819, 2007. © 2007 Society of Plastics Engineers
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
ICTAC Kinetics Committee recommendations for analysis of thermal decomposition kinetics
Koga, N., Vyazovkin, S., Burnham, A. K., Favergeon, L., Muravyev, N. V., Pérez-Maqueda, L. A., Saggese, C., & Sánchez-Jiménez, P. E. (2023) · Thermochimica Acta · doi:10.1016/j.tca.2022.179384 · Cited by 378
Kassab, A., Al Nabhani, D., Mohanty, P., Pannier, C., & Ayoub, G. Y. (2023) · Polymers · doi:10.3390/polym15193881 · Cited by 141
“By subjecting the material to similar processing conditions in terms of temperature and duration, but varying the mechanical stresses, distinct variations in molecular weight were observed, which were detected through changes in melt viscosity [117].”
Method
Metadata
- Authors
- Capone, C., Di Landro, L., Inzoli, F., Penco, M., & Sartore, L.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2007-09-28
- Volume
- 47
- Issue
- 11
- Pages
- 1813-1819
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2066429621
- Cited by
- 166
- References
- 0
- FWCI
- 2.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal and mechanical degradation during polymer extrusion processing. https://app.cochat.ai/papers/10.1002/pen.20882
- The paper
- Capone, C., Di Landro, L., Inzoli, F., Penco, M., & Sartore, L. (2007). Thermal and mechanical degradation during polymer extrusion processing. Polymer Engineering & Science. https://doi.org/10.1002/pen.20882
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.