The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Microcellular extrusion‐foaming of polylactide with chain‐extender
Abstract
The effects of adding epoxy‐functionalized chain‐extender (CE) and processing conditions such as die temperature on the cell morphology, volume expansion ratio (VER), open cell content (OCC), and crystallization of microcellular extruded polylactide (PLA) were investigated. When compared with pure PLA, the addition of talc decreased the average cell size and increased the cell density. Moreover, the simultaneous addition of talc and CE led to denser and more uniform cell structure up until 1.0% CE content. In general, the volume expansion ratio and open cell content of all the formulations decreased with the die temperature. The addition of talc decreased both VER and OCC, whereas the addition of CE increased both. The die temperature did not affect the degree of crystallinity significantly. The addition of talc increased the crystallinity, but the addition of CE decreased it. Finally, the molecular weight of PLA increased significantly with the addition of CE. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Crystallization Behavior and Morphology of Biodegradable Polylactide/Layered Silicate Nanocomposite
Nam, J. Y., Sinha Ray, S., & Okamoto, M. (2003) · Macromolecules · doi:10.1021/ma034623j · Cited by 429
Bioprocessing – no longer a field of dreams
Sawyer, D. J. (2003) · Macromolecular Symposia · doi:10.1002/masy.200351130 · Cited by 143
Cited by
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Al-Itry, R., Lamnawar, K., & Maazouz, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.028 · Cited by 906
Nofar, M., & Park, C. B. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.04.001 · Cited by 531
Self-citationWang, G., Wang, L., Mark, L. H., Shaayegan, V., Wang, G., Li, H., Zhao, G., & Park, C. B. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14111 · Cited by 315
Self-citationRoadmap to Biodegradable Plastics—Current State and Research Needs
Ghosh, K., & Jones, B. H. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c00801 · Cited by 260
Metadata
- Authors
- Pilla, S., Kim, S. G., Auer, G. K., Gong, S., & Park, C. B.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2009-06-08
- Volume
- 49
- Issue
- 8
- Pages
- 1653-1660
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2161949554
- Cited by
- 159
- References
- 4
- FWCI
- 6.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microcellular extrusion‐foaming of polylactide with chain‐extender. https://app.cochat.ai/papers/10.1002/pen.21385
- The paper
- Pilla, S., Kim, S. G., Auer, G. K., Gong, S., & Park, C. B. (2009). Microcellular extrusion‐foaming of polylactide with chain‐extender. Polymer Engineering & Science. https://doi.org/10.1002/pen.21385
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.