The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Influence of composition, crystallization conditions and melt phase structure on solid morphology, kinetics of crystallization and thermal behavior of binary polymer/polymer blends
Abstract
Results of an investigation on the morphology, the crystallization and the thermal behavior of several binary crystallizable blends are reported. The composition, molecular mass and crystallization conditions strongly influence the crystallization and the thermal behavior as well as the overall morphology of crystallizable binary blends. Quantities such as nucleation density (N), radial growth rate (G) of spherulites, overall rate of crystallization (K), and equilibrium melting temperature (Tm) are strongly dependent upon composition, crystallization conditions, and molecular mass of components. The type of dependence is to be related to the physical state of the melt, which, at the crystallization temperature, is in equilibrium with or coexists with the developing solid phase. In the ease of compatible blends such as poly(ethylene oxide)/poly(methyl methacrylate) the depression observed for G and Tm is mainly to be attributed to the diluent effect of the non‐crystallizable component. For such a blend it is found that, after crystallization, the non‐crystallizable component is trapped in intralamellar regions increasing the distance between adjacent lamellae. Depression of G, in the case of incompatible blends such as isotactic polypropylene/rubbers is mainly accounted for by rejection and deformation of rubber drops. The coexistence during crystallization of different processes such as molecular fractionation and segregation, preferential inclusion or dissolution of molecules with lower molecular mass and/or high degree of steric disorder of the crystallizable component in the phase rich in non‐crystallizable component and vice versa may explain some minima observed in the plots of T and Tm, vs. composition in the case of blends semicompatible in the melt. It was found that the addition of a second non‐crystallizable component causes drastic variations on some morphological and structural quantities of the semicrystalline matrix (isotactic polypropylene or nylon 6) such as the shape, dimensions, and regularity of spherulites and interspherulite boundary regions and lamella and interlamella thickness. In some cases the formation of new boundary lines connecting occluded particles are also observed. Such phenomena may have great importance on crack propagation and on impact behavior as well as on the tensile mechanical properties of binary blends characterized by a semicrystalline polymer component with a relatively high Tg and a rubber‐like component with a lower Tg.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Williams, M. L., Landel, R. F., & Ferry, J. D. (1955) · Journal of the American Chemical Society · doi:10.1021/ja01619a008 · Cited by 8,083
Cited by
Nijenhuis, A. J., Colstee, E., Grijpma, D. W., & Pennings, A. J. (1996) · Polymer · doi:10.1016/s0032-3861(96)00455-7 · Cited by 479
Avella, M., Martuscelli, E., & Raimo, M. (2000) · Journal of Materials Science · doi:10.1023/a:1004740522751 · Cited by 357
Self-citationAVELLA, M., & MARTUSCELLI, E. (1988) · Polymer · doi:10.1016/0032-3861(88)90384-9 · Cited by 343
Self-citationKinetics of polymer crystallisation
Long, Y., Shanks, R. A., & Stachurski, Z. H. (1995) · Progress in Polymer Science · doi:10.1016/0079-6700(95)00002-w · Cited by 252
Doroudiani, S., Park, C. B., & Kortschot, M. T. (1998) · Polymer Engineering & Science · doi:10.1002/pen.10289 · Cited by 252
Metadata
- Authors
- Martuscelli, E.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 1984-06
- Volume
- 24
- Issue
- 8
- Pages
- 563-586
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2084092917
- Cited by
- 232
- References
- 1
- FWCI
- 7.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.