The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Wood fibers as reinforcing fillers for polyolefins
Abstract
Wood pulp fibers possess strength and modulus properties which compare favorably with glass fibers when the differences in fiber densities are considered. Softwood pulp fibers with fiber aspect ratios near 100 are readily dispersed into high‐density polyethylene or isotactic polypropylene with the aid of carboxyic dispersing agents to form mixtures containing 50 weight‐percent wood pulp which can be readily injection molded. The mechanical properties of the molded specimens were similar for all types of pulp including Kraft (bleached and unbleached), mechanical and chemical‐mechanical pulps, waste pulps, and reclaim newspapers. Comparisons of the stiffness/weight efficiencies revealed that pulp composites equal or exceed the stiffness of most traditional materials of construction including steel, aluminum, glass‐fiber composites, and talefilled polyolefins, while retaining a major material cost advantage. The measured strength values of the pulp composites were less than the theoretically predicted values due to the presence of voids created by the formation of volatiles during processing. Mechanical pulps which were available in dry form were preferred because of lower cost and ease of handling. Wood fibers are non‐abrasive so that relatively large concentrations may be incorporated into polyolefins without causing serious machine wear during mixing and fabrication.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CZARNECKI, L., & White, J. L. (1980) · Journal of Applied Polymer Science · doi:10.1002/app.1980.070250623 · Cited by 249
Cited by
The nature of adhesion in composites of modified cellulose fibers and polypropylene
Felix, J. M., & Gatenholm, P. (1991) · Journal of Applied Polymer Science · doi:10.1002/app.1991.070420307 · Cited by 773
Thwe, M. M., & Liao, K. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00071-9 · Cited by 619
Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites
Thwe, M. M., & Liao, K. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00225-7 · Cited by 576
Bioprocess preparation of wheat straw fibers and their characterization
Sain, M., & Panthapulakkal, S. (2006) · Industrial Crops and Products · doi:10.1016/j.indcrop.2005.01.006 · Cited by 575
Adhikary, K. B., Pang, S., & Staiger, M. P. (2008) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2007.10.005 · Cited by 537
Metadata
- Authors
- Woodhams, R. T., Thomas, G., & Rodgers, D. K.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 1984-10
- Volume
- 24
- Issue
- 15
- Pages
- 1166-1171
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W1968400239
- Cited by
- 391
- References
- 1
- FWCI
- 1.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.