The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Dispersion of soybean stock‐based nanofiber in a plastic matrix
Abstract
The focus of this work is the study of the dispersion mechanism of soybean stock‐based nanofibers in a plastic matrix. The cellulose nanofibers were extracted from soybean stock by chemo‐mechanical treatments. These are bundles of cellulose nanofibers with a diameter ranging between 50 and 100 nm and lengths of thousands of nanometers. These nanofibers were characterized by atomic force microscopy and transmission electron microscopy. X‐ray diffraction studies showed that the soybean stock nanofibers had a relative percentage crystallinity of about 48%. Selective chemical treatments increased the cellulose content of soybean stock nanofibers from 41 to 61%. The matrix polymers used in this project were poly(vinyl alcohol) (PVA) and polyethylene (PE). The mechanical properties of nanofiber‐reinforced PVA film demonstrated a 4‐ to 5‐fold increase in tensile strength, as compared to the untreated fiber‐blend‐PVA film. One of the problems encountered in the use of nanoreinforcements lies in the difficulty in ensuring good dispersion of the filler in the composite material. Improved dispersion level of nanofibers within a thermoplastic was achieved by adding ethylene‐acrylic oligomer emulsion as a dispersant. In the solid phase of nanofiber‐blend‐PE composites, the compression‐molded samples showed that improved mechanical properties were achieved with coated nanofibers. Copyright © 2006 Society of Chemical Industry
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Helbert, W., Cavaillé, J. Y., & Dufresne, A. (1996) · Polymer Composites · doi:10.1002/pc.10650 · Cited by 473
Heux, L., Chauve, G., & Bonini, C. (2000) · Langmuir · doi:10.1021/la9913957 · Cited by 467
Improvement of starch film performances using cellulose microfibrils
Dufresne, A., & Vignon, M. R. (1998) · Macromolecules · doi:10.1021/ma971532b · Cited by 409
Cellulose nanocrystals reinforced poly(oxyethylene)
Azizi Samir, M. A. S., Alloin, F., Sanchez, J.-Y., & Dufresne, A. (2004) · Polymer · doi:10.1016/j.polymer.2004.03.094 · Cited by 398
Cited by
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Self-citationMicrofibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
Abdul Khalil, H. P. S., Davoudpour, Y., Islam, M. N., Mustapha, A., Sudesh, K., Dungani, R., & Jawaid, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.08.069 · Cited by 1,333
Cellulosic nanocomposites: a review
(2008) · BioResources · doi:10.15376/biores.3.3.929-980 · Cited by 901
Self-citation
Metadata
- Authors
- Wang, B., & Sain, M.
- Venue
- Polymer International
- Publisher
- Wiley
- Published
- 2006-12-08
- Volume
- 56
- Issue
- 4
- Pages
- 538-546
- ISSN
- 0959-8103 (ISSN-L)
- 1097-0126
- OpenAlex
- W1972887736
- Cited by
- 208
- References
- 4
- FWCI
- 1.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Dispersion of soybean stock‐based nanofiber in a plastic matrix. https://app.cochat.ai/papers/10.1002/pi.2167
- The paper
- Wang, B., & Sain, M. (2007). Dispersion of soybean stock‐based nanofiber in a plastic matrix. Polymer International. https://doi.org/10.1002/pi.2167
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.