The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Comparative study of maximum power point tracking algorithms
Open accessAbstract
Maximum power point trackers (MPPTs) play an important role in photovoltaic (PV) power systems because they maximize the power output from a PV system for a given set of conditions, and therefore maximize the array efficiency. Thus, an MPPT can minimize the overall system cost. MPPTs find and maintain operation at the maximum power point, using an MPPT algorithm. Many such algorithms have been proposed. However, one particular algorithm, the perturb‐and‐observe (P&O) method, claimed by many in the literature to be inferior to others, continues to be by far the most widely used method in commercial PV MPPTs. Part of the reason for this is that the published comparisons between methods do not include an experimental comparison between multiple algorithms with all algorithms optimized and a standardized MPPT hardware. This paper provides such a comparison. MPPT algorithm performance is quantified through the MPPT efficiency. In this work, results are obtained for three optimized algorithms, using a microprocessor‐controlled MPPT operating from a PV array and also a PV array simulator. It is found that the P&O method, when properly optimized, can have MPPT efficiencies well in excess of 97%, and is highly competitive against other MPPT algorithms. Copyright © 2002 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Maximum photovoltaic power tracking: an algorithm for rapidly changing atmospheric conditions
Hussein, K. H. (1995) · IEE Proceedings - Generation, Transmission and Distribution · doi:10.1049/ip-gtd:19951577 · Cited by 1,764
Development of a microcontroller-based, photovoltaic maximum power point tracking control system
Koutroulis, E., Kalaitzakis, K. C., & Voulgaris, N. C. (2001) · IEEE Transactions on Power Electronics · doi:10.1109/63.903988 · Cited by 1,305
Implementation of a DSP-controlled photovoltaic system with peak power tracking
Hua, C., Lin, J., & Shen, C. (1998) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.661310 · Cited by 706
Integrated photovoltaic maximum power point tracking converter
Enslin, J. H. R., Wolf, M. S., Snyman, D. B., & Swiegers, W. (1997) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.649937 · Cited by 516
A new maximum power point tracker of photovoltaic arrays using fuzzy controller
Won, C.-Y., Kim, D.-H., Kim, S.-C., Kim, W.-S., & Kim, H.-S. (2002) · Proceedings of 1994 Power Electronics Specialist Conference - PESC'94 · doi:10.1109/pesc.1994.349703 · Cited by 236
New approach to photovoltaic arrays maximum power point tracking
Brambilla, A., Gambarara, M., Garutti, A., & Ronchi, F. (2003) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.1999.785575 · Cited by 156
Step-down maximum power point tracker for photovoltaic systems
Salameh, Z. M., Dagher, F., & Lynch, W. A. (1991) · Solar Energy · doi:10.1016/0038-092x(91)90095-e · Cited by 129
A new peak power tracker for cost-effective photovoltaic power system
Kim, Y., Jo, H., & Kim, D. (2002) · Intersociety Energy Conversion Engineering Conference · doi:10.1109/iecec.1996.553353 · Cited by 67
200 W low cost module integrated utility interface for modular photovoltaic energy systems
Andersen, M. T., & Alvsten, B. (2002) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.1995.483472 · Cited by 49
Optimization of the function of a photovoltaic array using a feedback control system
Ela, M. A. E., & Roger, J. A. (1984) · Solar Cells · doi:10.1016/0379-6787(84)90002-4 · Cited by 23
Cited by
Optimization of Perturb and Observe Maximum Power Point Tracking Method
Femia, N., Petrone, G., Spagnuolo, G., & Vitelli, M. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.850975 · Cited by 3,002
A Comparative Study on Maximum Power Point Tracking Techniques for Photovoltaic Power Systems
Subudhi, B., & Pradhan, R. (2013) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2012.2202294 · Cited by 1,867
Reza Reisi, A., Hassan Moradi, M., & Jamasb, S. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.052 · Cited by 690
A comprehensive review of maximum power point tracking algorithms for photovoltaic systems
Kamarzaman, N. A., & Tan, C. W. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.05.045 · Cited by 364
Maximum power point tracking algorithms for photovoltaic system – A review
Saravanan, S., & Ramesh Babu, N. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.105 · Cited by 364
Metadata
- Authors
- Hohm, D. P., & Ropp, M. E.
- Venue
- Progress in Photovoltaics: Research and Applications
- Publisher
- Wiley
- Published
- 2002-11-22
- Volume
- 11
- Issue
- 1
- Pages
- 47-62
- ISSN
- 1062-7995 (ISSN-L)
- 1099-159X
- OpenAlex
- W2045899066
- Cited by
- 865
- References
- 10
- FWCI
- 4.21
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.