The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Thin‐film silicon solar cell technology
Open accessAbstract
This paper describes the use, within p–i–n‐ and n–i–p‐type solar cells, of hydrogenated amorphous silicon (a‐Si:H) and hydrogenated microcrystalline silicon (μc‐Si:H) thin films (layers), both deposited at low temperatures (200°C) by plasma‐assisted chemical vapour deposition (PECVD), from a mixture of silane and hydrogen. Optical and electrical properties of the i‐layers are described. These properties are linked to the microstructure and hence to the i‐layer deposition rate, that in turn, affects throughput in production. The importance of contact and reflection layers in achieving low electrical and optical losses is explained, particularly for the superstrate case. Especially the required properties for the transparent conductive oxide (TCO) need to be well balanced in order to provide, at the same time, for high electrical conductivity (preferably by high electron mobility), low optical absorption and surface texture (for low optical losses and pronounced light trapping). Single‐junction amorphous and microcrystalline p–i–n‐type solar cells, as fabricated so far, are compared in their key parameters (Jsc, FF,Voc) with the [theoretical] limiting values. Tandem and multijunction cells are introduced; the μc‐Si: H/a‐Si: H or [micromorph] tandem solar cell concept is explained in detail, and recent results obtained here are listed and commented. Factors governing the mass‐production of thin‐film silicon modules are determined both by inherent technical reasons, described in detail, and by economic considerations. The cumulative effect of these factors results in distinct efficiency reductions from values of record laboratory cells to statistical averages of production modules. Finally, applications of thin‐film silicon PV modules, especially in building‐integrated PV (BIPV) are shown. In this context, the energy yields of thin‐film silicon modules emerge as a valuable gauge for module performance, and compare very favourably with those of other PV technologies. Copyright © 2004 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solar cells—Operating principles, technology and system applications
(1982) · Solar Energy · doi:10.1016/0038-092x(82)90265-1 · Cited by 1,724
Complete microcrystalline p-i-n solar cell—Crystalline or amorphous cell behavior?
Meier, J., Flückiger, R., Keppner, H., & Shah, A. (1994) · Applied Physics Letters · doi:10.1063/1.112183 · Cited by 597
Self-citationThe Preparation and Properties of Amorphous Silicon
Chittick, R. C., Alexander, J. H., & Sterling, H. F. (1969) · Journal of The Electrochemical Society · doi:10.1149/1.2411779 · Cited by 498
Characterization of Transparent Conducting Oxides
Coutts, T. J., Young, D. L., & Li, X. (2000) · MRS Bulletin · doi:10.1557/mrs2000.152 · Cited by 407
On the Way Towards High Efficiency Thin Film Silicon Solar Cells by the “Micromorph” Concept
Meier, J., Torres, P., Platz, R., Dubail, S., Kroll, U., Selvan, J. A. A., Vaucher, N. P., Hof, C., Fischer, D., Keppner, H., et al. (1996) · MRS Proceedings · doi:10.1557/proc-420-3 · Cited by 248
Self-citationHigh efficiency thin film silicon hybrid solar cell module on 1 m/sup 2/-class large area substrate
Yoshimi, M., Sasaki, T., Sawada, T., Suezaki, T., Meguro, T., Matsuda, T., Santo, K., Wadano, K., Ichikawa, M., Nakajima, A., et al. (2003) · World Conference on Photovoltaic Energy Conversion · Cited by 42
High efficiency thin film silicon solar cell and module
Yamamoto, K., Nakajima, A., Yoshimi, M., Sawada, T., Fukuda, S., Hayashi, K., Suezaki, T., Ichikawa, M., Koi, Y., Goto, M., et al. (2003) · Conference record of the IEEE Photovoltaic Specialists Conference · doi:10.1109/pvsc.2002.1190800 · Cited by 33
Cited by
Coaxial silicon nanowires as solar cells and nanoelectronic power sources
Tian, B., Zheng, X., Kempa, T. J., Fang, Y., Yu, N., Yu, G., Huang, J., & Lieber, C. M. (2007) · Nature · doi:10.1038/nature06181 · Cited by 2,929
Low-temperature processed meso-superstructured to thin-film perovskite solar cells
Ball, J. M., Lee, M. M., Hey, A., & Snaith, H. J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40810h · Cited by 1,662
Solar photovoltaic electricity: Current status and future prospects
Razykov, T. M., Ferekides, C. S., Morel, D., Stefanakos, E., Ullal, H. S., & Upadhyaya, H. M. (2011) · Solar Energy · doi:10.1016/j.solener.2010.12.002 · Cited by 1,090
Nanodome Solar Cells with Efficient Light Management and Self-Cleaning
Zhu, J., Hsu, C.-M., Yu, Z., Fan, S., & Cui, Y. (2010) · Nano Letters · doi:10.1021/nl9034237 · Cited by 873
Derkacs, D., Lim, S. H., Matheu, P., Mar, W., & Yu, E. T. (2006) · Applied Physics Letters · doi:10.1063/1.2336629 · Cited by 788
Metadata
- Authors
- Shah, A. V., Schade, H., Vanecek, M., Meier, J., Vallat‐Sauvain, E., Wyrsch, N., Kroll, U., Droz, C., & Bailat, J.
- Venue
- Progress in Photovoltaics: Research and Applications
- Publisher
- Wiley
- Published
- 2004-03
- Volume
- 12
- Issue
- 2-3
- Pages
- 113-142
- ISSN
- 1062-7995 (ISSN-L)
- 1099-159X
- OpenAlex
- W2076725394
- Cited by
- 711
- References
- 7
- FWCI
- 7.19
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.