The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Fracture processes in polymeric materials. I. The surface energy of poly(methyl methacrylate)
Abstract
The general aspects of the problem of fracture and strength are briefly reviewed. The discrepancy between the observed strength of materials and the theoretical value calculated from the molecular structure is usually ascribed to the presence of adventitious flaws present in all samples tested. The Griffith theory of brittle fracture gives the relation between the tensile strength T and the size of the flaw in the sample c as T = A(E γ/c)1/2. The tensile strengths of samples of poly(methyl methacrylate) containing artificially induced cracks of known size were determined. The results could be represented over a wide range of experimental conditions by the form of the Griffith theory. The value of the specific surface energy obtained from the position of the theoretical curve was ∼3 × 10 5 ergs/cm.2. The value calculated from the molecular structure of the material is ∼450 ergs/cm.2. The discrepancy is attributed to the energy consumed in a viscous flow process in a thin layer of material at the fracture surface. As a result of this process it is believed that in the surface layer polymer molecules are oriented normally to the fracture plane. This mechanism accounts for the colors observed on the fracture surface and for their lability on exposure to solvents or heating. The Griffith theory postulates a strong dependence of tensile strength on surface energy. In poly(methyl methacrylate) the largest contribution to the surface energy appears to arise from a viscous flow process. Hence for polymers the strength may depend much more on the intermolecular (van der Waals) forces than on then ature of the intramolecular primary valence bonds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Cited by
Mechanical Properties of Solid Polymers: Third Edition
Ward, I. M., & Sweeney, J. (2012) · Wiley eBooks · doi:10.1002/9781119967125 · Cited by 2,084
A review of crazing and fracture in thermoplastics
Kambour, R. P. (1973) · Journal of Polymer Science: Macromolecular Reviews · doi:10.1002/pol.1973.230070101 · Cited by 695
Influence of molecular weight and molecular weight distribution on mechanical properties of polymers
Nunes, R. W., Martin, J. R., & Johnson, J. F. (1982) · Polymer Engineering & Science · doi:10.1002/pen.760220402 · Cited by 473
Determination of Fracture Surface Energies by the Cleavage Technique
Berry, J. P. (1963) · Journal of Applied Physics · doi:10.1063/1.1729091 · Cited by 333
Self-citationRuiz-Pérez, L., Royston, G. J., Fairclough, J. P. A., & Ryan, A. J. (2008) · Polymer · doi:10.1016/j.polymer.2008.07.048 · Cited by 302
Metadata
- Authors
- Berry, J. P.
- Venue
- Journal of Polymer Science
- Publisher
- Wiley
- Published
- 1961-03
- Volume
- 50
- Issue
- 153
- Pages
- 107-115
- ISSN
- 0022-3832 (ISSN-L)
- 1542-6238
- OpenAlex
- W2082856748
- Cited by
- 195
- References
- 1
- FWCI
- 19.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fracture processes in polymeric materials. I. The surface energy of poly(methyl methacrylate). https://app.cochat.ai/papers/10.1002/pol.1961.1205015313
- The paper
- Berry, J. P. (1961). Fracture processes in polymeric materials. I. The surface energy of poly(methyl methacrylate). Journal of Polymer Science. https://doi.org/10.1002/pol.1961.1205015313
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.