Studies on the α and β forms of isotactic polypropylene by crystallization in a temperature gradient
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Samples of isotactic polypropylene (PP) were zone‐solidified in temperature gradients up to 300°C/cm at growth rates down to 3 μm/min. Oriented α‐type spherulites were obtained only by nucleation. While β nucleation is extremely rare, the β phase is easily initiated by growth transformations along the oriented α front. Since the β phase was found to grow considerably faster than the α phase, the α‐to‐β transformation points diverge across the sample, interrupting growth of the oriented α fibrils. This causes subsequent nucleation to yield teardrop‐shaped α spherulites. Differential scanning calorimetry (DSC) studies of zone‐solidified PP show the β‐phase to be favored by slow growth rates, high temperature gradients, and large degrees of superheat in the melt—all of which tend to suppress nucleation. Differential thermograms of largely β‐PP obtained at a heating rate of 1°C/min show the actual melting and recrystallization of the β spherulites into the α form.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Crystalline forms of isotactic polypropylene
Jones, A., Aizlewood, J. M., & Beckett, D. R. (1964) · Die Makromolekulare Chemie · doi:10.1002/macp.1964.020750113 · Cited by 1,584
Structure and properties of isotactic polypropylene
Natta, G., & Corradini, P. (1960) · Il Nuovo Cimento · doi:10.1007/bf02731859 · Cited by 869
Crystallization of bulk polymers with chain folding: theory of growth of lamellar spherulites
Hoffman, J. D., & Lauritzen, J. I. (1961) · Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry · doi:10.6028/jres.065a.035 · Cited by 693
Spherulitic Crystallization in Polypropylene
Padden, F. J., & Keith, H. D. (1959) · Journal of Applied Physics · doi:10.1063/1.1734985 · Cited by 680
Hoffman, J. D., Frolen, L. J., Ross, G. S., & Lauritzen, J. I. (1975) · Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry · doi:10.6028/jres.079a.026 · Cited by 485
Rate of Spherulitic Crystallization with Chain Folds in Polychlorotrifluoroethylene
Hoffman, J. D., & Weeks, J. J. (1962) · The Journal of Chemical Physics · doi:10.1063/1.1733363 · Cited by 460
Evidence for a Second Crystal Form of Polypropylene
Keith, H. D., Padden, F. J., Walter, N. M., & Wyckoff, H. W. (1959) · Journal of Applied Physics · doi:10.1063/1.1734986 · Cited by 367
Einfluß der kristallstruktur und der überstruktur auf einige eigenschaften von polypropylen
Leugering, V. H. J. (1967) · Die Makromolekulare Chemie · doi:10.1002/macp.1967.021090118 · Cited by 212
Quantitative structural characterization of the melting behavior of isotactic polypropylene
Samuels, R. J. (1975) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1975.180130713 · Cited by 173
BINSBERGEN, F., & DELANGE, B. (1970) · Polymer · doi:10.1016/0032-3861(70)90071-6 · Cited by 163
Cited by
Varga, J. (2002) · Journal of Macromolecular Science, Part B · doi:10.1081/mb-120013089 · Cited by 729
Fillon, B., Wittmann, J. C., Lotz, B., & Thierry, A. (1993) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1993.090311013 · Cited by 651
Polymorphism in isotactic polypropylene
Brückner, S., Meille, S. V., Petraccone, V., & Pirozzi, B. (1991) · Progress in Polymer Science · doi:10.1016/0079-6700(91)90023-e · Cited by 506
Flow-induced shish-kebab precursor structures in entangled polymer melts
Somani, R. H., Yang, L., Zhu, L., & Hsiao, B. S. (2005) · Polymer · doi:10.1016/j.polymer.2005.06.034 · Cited by 484
Somani, R. H., Hsiao, B. S., Nogales, A., Fruitwala, H., Srinivas, S., & Tsou, A. H. (2001) · Macromolecules · doi:10.1021/ma0106191 · Cited by 423
Advanced polymeric dielectrics for high energy density applications
Huan, T. D., Boggs, S., Teyssedre, G., Laurent, C., Cakmak, M., Kumar, S., & Ramprasad, R. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.05.001 · Cited by 387
Lovinger, A. J. (1982) · Developments in Crystalline Polymers—1 · doi:10.1007/978-94-009-7343-5_5 · Cited by 383
Self-citationCrystallization processes in quiescent and moving polymer melts under heat transfer conditions
Eder, G., Janeschitz-Kriegl, H., & Liedauer, S. (1990) · Progress in Polymer Science · doi:10.1016/0079-6700(90)90008-o · Cited by 287
Lezak, E., Bartczak, Z., & Galeski, A. (2006) · Polymer · doi:10.1016/j.polymer.2006.10.016 · Cited by 97
Cocca, M., Androsch, R., Righetti, M. C., Malinconico, M., & Di Lorenzo, M. L. (2014) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2014.02.038 · Cited by 92
Crystallization and orientation of isotactic poly(propylene) in cylindrical nanopores
Reid, D. K., Ehlinger, B. A., Shao, L., & Lutkenhaus, J. L. (2014) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23577 · Cited by 17
Metadata
- Authors
- Lovinger, A. J., Chua, J. O., & Gryte, C. C.
- Venue
- Journal of Polymer Science: Polymer Physics Edition
- Publisher
- Wiley
- Published
- 1977-04
- Volume
- 15
- Issue
- 4
- Pages
- 641-656
- ISSN
- 0098-1273 (ISSN-L)
- 1542-9385
- OpenAlex
- W2023072133
- Cited by
- 429
- References
- 16
- FWCI
- 5.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.