The DOI matches its Crossref record.
Synthesis and characterization of monomers and polymers for adhesives from methyl oleate
Abstract
The focus of this work is to synthesize a monomer from a fatty acid methyl ester capable of forming high molecular weight polymers. The mono‐unsaturation in the starting material, methyl oleate, was first epoxidized using a peroxy acid. This intermediate material was further modified using acrylic acid. The acrylated molecule is able to participate in free‐radical polymerization reactions to form high molecular weight polymers. The rate of polymerization was low because of the long aliphatic structure of the monomer. It is hypothesized that the polymerization reaction occurred in the interface between the particle and water, thereby slowing down the reaction. After 18 h of reaction, a monomer conversion of approximately 91% was achieved. A maximum weight‐average molecular weight of approximately 10 6 g/mol was observed after 14 h of reaction. At early reaction times linear polymers were formed. However, as the reaction time increased, the amount of branching that occurred on the polymer molecule increased, as indicated by gel permeation chromatography and light scattering. This has been attributed to chain transfer to polymer via hydrogen abstraction from a tertiary backbone C–H bond. The resulting polymer may be of considerable interest for pressure‐sensitive adhesive applications. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 451–458, 2002; DOI 10.1002/pola.10130
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Plant oil renewable resources as green alternatives in polymer science
Meier, M. A. R., Metzger, J. O., & Schubert, U. S. (2007) · Chemical Society Reviews · doi:10.1039/b703294c · Cited by 1,487
Vegetable oil-based polymeric materials: synthesis, properties, and applications
Xia, Y., & Larock, R. C. (2010) · Green Chemistry · doi:10.1039/c0gc00264j · Cited by 864
Vegetable-oil-based polymers as future polymeric biomaterials
Miao, S., Wang, P., Su, Z., & Zhang, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.08.040 · Cited by 573
Surface-initiated self-healing of polymers in aqueous media
Ahn, B. K., Lee, D. W., Israelachvili, J. N., & Waite, J. H. (2014) · Nature Materials · doi:10.1038/nmat4037 · Cited by 482
The Lipid Handbook with CD-ROM
Gunstone, F. D., Harwood, J. L., & Harwood, J. L. (2007) · CRC Press eBooks · doi:10.1201/9781420009675 · Cited by 262
Metadata
- Authors
- Bunker, S. P., & Wool, R. P.
- Venue
- Journal of Polymer Science Part A: Polymer Chemistry
- Publisher
- Wiley
- Published
- 2002-01-04
- Volume
- 40
- Issue
- 4
- Pages
- 451-458
- ISSN
- 0887-624X (ISSN-L)
- 1099-0518
- OpenAlex
- W2108863763
- Cited by
- 211
- References
- 0
- FWCI
- 2.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis and characterization of monomers and polymers for adhesives from methyl oleate. https://app.cochat.ai/papers/10.1002/pola.10130
- The paper
- Bunker, S. P., & Wool, R. P. (2002). Synthesis and characterization of monomers and polymers for adhesives from methyl oleate. Journal of Polymer Science Part A: Polymer Chemistry. https://doi.org/10.1002/pola.10130
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.