The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Microemulsion polymerization of styrene
Abstract
Initiation of polymerization in styrene oil‐in‐water microemulsions by water‐soluble potassium persulfate of oil‐soluble 2,2′‐azobis‐(2‐methyl butyronitrile) at 70°C gave stable latexes which were bluish and less translucent than the original microemulsions. The effects of initiator concentration, polymerization temperature, and monomer concentration on the kinetics, particle size distributions, and molecular weight distributions were investigated. The kinetics of polymerization were measured by dilatometry. In all cases, the polymerization rate shows only two intervals, which increased to a maximum and then decreased. There was no apparent constant rate period and no gel effect. A longer nucleation period was found for polymerizations initiated by potassium persulfate as compared to 2,2′‐azobis‐(2‐methyl butyronitrile). The small latex particle size (20–30 nm) and high polymer molecular weight (1–2 × 10 6) implies that each latex particle consists of two or three polystyrene molecules. The maximum polymerization rate and number of particles varied with the 0.47 and 0.40 powers of potassium persulfate concentration, and the 0.39 and 0.38 powers of 2,2′‐azobis‐(2‐methyl butyronitrile) concentration, respectively. This is consistent with the 0.4 power predicted by Smith–Ewart Case 2 kinetics. Microemulsion polymerizations of styrene–toluene mixtures at the same oil‐water phase ratio gave lower polymerization rates and lower molecular weights, but the same latex particle size as with styrene alone. A mechanism is proposed, which comprised initiation and polymerization in the microemulsion droplets, by comparing the kinetics of microemulsion polymerization with conventional emulsion and miniemulsion polymerization systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Odian, G. (2004) · doi:10.1002/047147875x · Cited by 7,158
Cited by
Advances in Colloidal Assembly: The Design of Structure and Hierarchy in Two and Three Dimensions
Vogel, N., Retsch, M., Fustin, C.-A., del Campo, A., & Jonas, U. (2015) · Chemical Reviews · doi:10.1021/cr400081d · Cited by 767
Macroporous copolymer networks
Okay, O. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00015-0 · Cited by 765
Microemulsion method: A novel route to synthesize organic and inorganic nanomaterials
Malik, M. A., Wani, M. Y., & Hashim, M. A. (2012) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2010.09.027 · Cited by 657
Barbetta, A., & Cameron, N. R. (2004) · Macromolecules · doi:10.1021/ma0359436 · Cited by 338
Formulation and Stability Mechanisms of Polymerizable Miniemulsions
Landfester, K., Bechthold, N., Tiarks, F., & Antonietti, M. (1999) · Macromolecules · doi:10.1021/ma990299+ · Cited by 331
Metadata
- Authors
- Guo, J. S., El‐Aasser, M. S., & Vanderhoff, J. W.
- Venue
- Journal of Polymer Science Part A: Polymer Chemistry
- Publisher
- Wiley
- Published
- 1989-01-30
- Volume
- 27
- Issue
- 2
- Pages
- 691-710
- ISSN
- 0887-624X (ISSN-L)
- 1099-0518
- OpenAlex
- W2093188746
- Cited by
- 168
- References
- 1
- FWCI
- 6.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.