The DOI matches its Crossref record.
One‐pot synthesis of nylon 6–clay hybrid
Abstract
Nylon 6–clay hybrid is a molecular composite of nylon 6 and uniformly dispersed silicate layers of montmorillonite. One‐pot synthesis of the hybrid was carried out by the following procedures. Montmorillonite was dispersed in water, and then ε‐caprolactam, acid (phosphoric acid, hydrochloric acid, benzenesulfonic acid, isophthalic acid, trichloroacetic acid, or acetic acid), and 6‐aminocaproic acid were added to the dispersion. The mixtures were reacted at 260°C for 6 h, yielding the nylon 6–clay hybrids (1potNCHs). X‐ray diffraction revealed that the silicate layers of 1potNCH by phosphoric acid were uniformly dispersed in the nylon 6 matrix. The 1potNCH had excellent mechanical properties. The strength and the modulus of the hybrid increased compared with previously reported nylon 6–clay hybrid (NCH) synthesized by montmorillonite intercalated with 12‐aminolauric acid. The heat distortion temperature (HDT) of the 1potNCH was 160°C, which was 8°C higher than that of NCH. In other 1potNCHs, montmorillonite had a smaller effect on the increase of those properties, and interlayer spacing of montmorillonite was observed at ca. 20 Å. © 1993 John Wiley & Sons, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Polymer nanotechnology: Nanocomposites
Paul, D. R., & Robeson, L. M. (2008) · Polymer · doi:10.1016/j.polymer.2008.04.017 · Cited by 3,317
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Potential perspectives of bio-nanocomposites for food packaging applications
Sorrentino, A., Gorrasi, G., & Vittoria, V. (2007) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2006.09.004 · Cited by 1,112
Yetisen, A. K., Qu, H., Manbachi, A., Butt, H., Dokmeci, M. R., Hinestroza, J. P., Skorobogatiy, M., Khademhosseini, A., & Yun, S. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b08176 · Cited by 752
Multiscale modeling and simulation of polymer nanocomposites
Zeng, Q. H., Yu, A. B., & Lu, G. Q. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.09.002 · Cited by 657
Metadata
- Authors
- Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Kurauchi, T., & Kamigaito, O.
- Venue
- Journal of Polymer Science Part A: Polymer Chemistry
- Publisher
- Wiley
- Published
- 1993-06
- Volume
- 31
- Issue
- 7
- Pages
- 1755-1758
- ISSN
- 0887-624X (ISSN-L)
- 1099-0518
- OpenAlex
- W2127314720
- Cited by
- 433
- References
- 0
- FWCI
- 1.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: One‐pot synthesis of nylon 6–clay hybrid. https://app.cochat.ai/papers/10.1002/pola.1993.080310714
- The paper
- Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Kurauchi, T., & Kamigaito, O. (1993). One‐pot synthesis of nylon 6–clay hybrid. Journal of Polymer Science Part A: Polymer Chemistry. https://doi.org/10.1002/pola.1993.080310714
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
