Dislocation approach to the plastic deformation of semicrystalline polymers: Kinetic aspects for polyethylene and polypropylene*
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The plasticity of semicrystalline polymers is analyzed in the framework of Young's dislocation model under the assumption of nucleation of screw dislocations from the lateral surface of the crystalline lamellae. It is proposed that the driving force for the nucleation and propagation across the crystal width of these screw dislocations relies on chain twist defects that migrate along the chains stems and allow a step‐by‐step translation of the stems through the crystal thickness. Such defects are identified as thermally activated conformational defects responsible for the so‐called crystalline relaxation. Dislocation kinetic equations are derived. Plastic flow rates attainable by dislocation motion in polyethylene and polypropylene are assessed with frequency–temperature data of the crystalline relaxation. Comparisons are made with experimental strain rates that enable homogeneous plastic deformation. In addition to temperature, the crystal lamellar thickness, which is a basic factor of the plastic flow stress in Young's dislocation model, is a major factor in dislocation kinetics through its influence on chain twist activation. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 593–601, 2002; DOI 10.1002/polb.10118
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Galeski, A., Bartczak, Z., Argon, A. S., & Cohen, R. E. (1992) · Macromolecules · doi:10.1021/ma00047a023 · Cited by 247
Cited by
Strength and toughness of crystalline polymer systems
Galeski, A. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.09.003 · Cited by 614
Cavitation during deformation of semicrystalline polymers
Pawlak, A., Galeski, A., & Rozanski, A. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.10.007 · Cited by 355
Ultra high molecular weight polyethylene: Mechanics, morphology, and clinical behavior
Sobieraj, M. C., & Rimnac, C. M. (2009) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2008.12.006 · Cited by 289
New Insight on Initiation of Cavitation in Semicrystalline Polymers: In-Situ SAXS Measurements
Humbert, S., Lame, O., Chenal, J. M., Rochas, C., & Vigier, G. (2010) · Macromolecules · doi:10.1021/ma101042d · Cited by 176
Plasticity of semicrystalline polymers
Bartczak, Z., & Galeski, A. (2010) · Macromolecular Symposia · doi:10.1002/masy.201050807 · Cited by 150
Metadata
- Authors
- Séguéla, R.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2002-02
- Volume
- 40
- Issue
- 6
- Pages
- 593-601
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2165077886
- Cited by
- 78
- References
- 1
- FWCI
- 5.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.