The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Dissolution and regeneration of cellulose in NaOH/thiourea aqueous solution
Abstract
A novel cellulose solvent, 1.5 M NaOH/0.65 M thiourea aqueous solution, was used to dissolve cotton linters having a molecular weight of 10.1 × 10 4 to prepare cellulose solution. Regenerated cellulose (RC) films were obtained from the cellulose solution by coagulating with sulfuric acid (H 2 SO 4) aqueous solution with a concentration from 2 to 30 wt %. Solubility of cellulose, structure, and mechanical properties of the RC films were examined by infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, 13 C NMR, and tensile tests. 13 C NMR analysis indicated that the novel solvent of cellulose is a nonderivative aqueous solution system. The presence of thiourea enhanced significantly the solubility of cellulose in NaOH aqueous solution and reduced the formation of cellulose gel; as a result, thiourea prevented the association between cellulose molecules, leading to the solvation of cellulose. The RC film obtained by coagulating with 5 wt % H 2 SO 4 aqueous solution for 5 min exhibited higher mechanical properties than that with other H 2 SO 4 concentrations and a homogenous porous structure with a mean pore size of 186 nm for free surface in the wet state. The RC film plasticized with 10% glycerin for 5 min had a tensile strength of 107 MPa and breaking elongation of 10%, and about 1% glycerin in the RC film plays an important role in the enhancement of the mechanical properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1521–1529, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solution studies of cellulose in lithium chloride and N,N-dimethylacetamide
McCormick, C. L., Callais, P. A., & Hutchinson, B. H. (1985) · Macromolecules · doi:10.1021/ma00154a010 · Cited by 672
Solid-state CP/MAS carbon-13 NMR study of cellulose polymorphs
Isogai, A., Usuda, M., Kato, T., Uryu, T., & Atalla, R. H. (1989) · Macromolecules · doi:10.1021/ma00197a045 · Cited by 424
Scott, G. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00182-2 · Cited by 330
Solubility of Cellulose in NaOH/Urea Aqueous Solution
Zhou, J., & Zhang, L. (2000) · Polymer Journal · doi:10.1295/polymj.32.866 · Cited by 302
Self-citationZhang, L., Ruan, D., & Zhou, J. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0010417 · Cited by 227
Self-citationA viscosity-molecular weight relationship for cellulose in cadoxen and a hydrodynamic interpretation
Brown, W., & Wikström, R. (1965) · European Polymer Journal · doi:10.1016/0014-3057(65)90041-8 · Cited by 197
Study on the Solubility of Cellulose in Aqueous Alkali Solution by Deuteration IR and 13C NMR
Kamida, K., Okajima, K., Matsui, T., & Kowsaka, K. (1984) · Polymer Journal · doi:10.1295/polymj.16.857 · Cited by 177
Schurz, J. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(99)00011-8 · Cited by 169
Crystallization of cellulose with N‐methylmorpholine N‐oxide: A new method of texturing cellulose
Chanzy, H., Dubé, M., & MARCHESSAULT, R. H. (1979) · Journal of Polymer Science Polymer Letters Edition · doi:10.1002/pol.1979.130170408 · Cited by 101
Reaction characteristics of cellulose in the LiCl/1,3‐dimethyl‐2‐imidazolidinone solvent system
Takaragi, A., Minoda, M., Miyamoto, T., Liu, H. Q., & Zhang, L. N. (1999) · Cellulose · doi:10.1023/a:1009208417954 · Cited by 90
Self-citation
Cited by
Natural Biopolymer-Based Nanocomposite Films for Packaging Applications
Rhim, J.-W., & Ng, P. K. W. (2007) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408390600846366 · Cited by 849
On the mechanism of dissolution of cellulose
Lindman, B., Karlström, G., & Stigsson, L. (2010) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2010.04.016 · Cited by 792
Hydrogels based on cellulose and chitin: fabrication, properties, and applications
Shen, X., Shamshina, J. L., Berton, P., Gurau, G., & Rogers, R. D. (2016) · Green Chemistry · doi:10.1039/c5gc02396c · Cited by 669
Cellulose Aerogels: Synthesis, Applications, and Prospects
Long, L.-Y., Weng, Y.-X., & Wang, Y.-Z. (2018) · Polymers · doi:10.3390/polym10060623 · Cited by 568
Medronho, B., Romano, A., Miguel, M. G., Stigsson, L., & Lindman, B. (2012) · Cellulose · doi:10.1007/s10570-011-9644-6 · Cited by 565
Wang, S., Yu, L., Wang, S., Zhang, L., Chen, L., Xu, X., Song, Z., Liu, H., & Chen, C. (2022) · Nature Communications · doi:10.1038/s41467-022-30224-8 · Cited by 450
Self-citationXu, A., Wang, J., & Wang, H. (2010) · Green Chem. · doi:10.1039/b916882f · Cited by 439
Brief overview on cellulose dissolution/regeneration interactions and mechanisms
Medronho, B., & Lindman, B. (2015) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2014.05.004 · Cited by 415
Cellulose in NaOH–water based solvents: a review
Budtova, T., & Navard, P. (2016) · Cellulose · doi:10.1007/s10570-015-0779-8 · Cited by 392
Competing forces during cellulose dissolution: From solvents to mechanisms
Medronho, B., & Lindman, B. (2014) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2013.12.001 · Cited by 357
Enhanced enzymatic hydrolysis of spruce by alkaline pretreatment at low temperature
Zhao, Y., Wang, Y., Zhu, J. Y., Ragauskas, A., & Deng, Y. (2008) · Biotechnology and Bioengineering · doi:10.1002/bit.21712 · Cited by 342
3D printing using plant-derived cellulose and its derivatives: A review
Dai, L., Cheng, T., Duan, C., Zhao, W., Zhang, W., Zou, X., Aspler, J., & Ni, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.027 · Cited by 340
Cellulose/chitin beads for adsorption of heavy metals in aqueous solution
Zhou, D., Zhang, L., Zhou, J., & Guo, S. (2004) · Water Research · doi:10.1016/j.watres.2004.03.026 · Cited by 336
Self-citationFunctional Cellulose Beads: Preparation, Characterization, and Applications
Gericke, M., Trygg, J., & Fardim, P. (2013) · Chemical Reviews · doi:10.1021/cr300242j · Cited by 325
Solution NMR Spectroscopy of Food Polysaccharides
Cheng, H. N., & Neiss, T. G. (2012) · Polymer Reviews · doi:10.1080/15583724.2012.668154 · Cited by 279
Green composite films prepared from cellulose, starch and lignin in room-temperature ionic liquid
Wu, R.-L., Wang, X.-L., Li, F., Li, H.-Z., & Wang, Y.-Z. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.11.044 · Cited by 278
Functional nanocomposites from sustainable regenerated cellulose aerogels: A review
Wan, C., Jiao, Y., Wei, S., Zhang, L., Wu, Y., & Li, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.115 · Cited by 256
Self-citationTran, C. D., Duri, S., Delneri, A., & Franko, M. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.02.046 · Cited by 121
(2007) · Food Science and Biotechnology · Cited by 74
Development of expert system for biobased polymer material selection: food packaging application
Sanyang, M. L., & Sapuan, S. M. (2015) · Journal of Food Science and Technology · doi:10.1007/s13197-015-1759-6 · Cited by 45
Metadata
- Authors
- Zhang, L., Ruan, D., & Gao, S.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2002-06-03
- Volume
- 40
- Issue
- 14
- Pages
- 1521-1529
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2159942602
- Cited by
- 319
- References
- 23
- FWCI
- 2.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.