The DOI matches its Crossref record.
Multiple melting behavior of poly(butylene succinate). I. Thermal analysis of melt‐crystallized samples
Abstract
The multiple melting behavior of poly(butylene succinate) (PBSu) was studied with differential scanning calorimetry (DSC). Three different PBSu resins, with molecular weights of 1.1 × 10 5, 1.8 × 10 5, and 2.5 × 10 5, were cooled from the melt (150 °C) at various cooling rates (CRs) ranging from 0.2 to 50 K min−1. The peak crystallization temperature (Tc) of the DSC curve in the cooling process decreased almost linearly with the logarithm of the CR. DSC melting curves for the melt‐crystallized samples were obtained at 10 K min−1. Double endothermic peaks, a high‐temperature peak H and a low‐temperature peak L, and an exothermic peak located between them appeared. Peak L decreased with increasing CR, whereas peak H increased. An endothermic shoulder peak appeared at the lower temperature of peak H. The CR dependence of the peak melting temperatures [Tm(L) and Tm(H)], recrystallization temperature (Tre), and heat of fusion (Δ H) was obtained. Their fitting curves were obtained as functions of log(CR). Tm(L), Tre, and Δ H decreased almost linearly with log(CR), whereas Tm(H) was almost constant. Peak H decreased with the molecular weight, whereas peak L increased. It was suggested that the rate of the recrystallization decreased with the molecular weight. Tm(L), Tm(H), Tre, and Tc for the lowest molecular weight sample were lower than those for the others. In contrast, Δ H for the highest molecular weight sample was lower than that for the others. If the molecular weight dependence of the melting temperature for PBSu is similar to that for polyethylene, the results for the molecular weight dependence of PBSu can be explained. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2411–2420, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Pan, P., Kai, W., Zhu, B., Dong, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071258d · Cited by 679
Thermal analysis of the double‐melting behavior of poly(L‐lactic acid)
Yasuniwa, M., Tsubakihara, S., Sugimoto, Y., & Nakafuku, C. (2004) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10674 · Cited by 375
Self-citationPapageorgiou, G. Z., & Bikiaris, D. N. (2005) · Polymer · doi:10.1016/j.polymer.2005.10.073 · Cited by 370
Influence of melting conditions on the thermal behaviour of poly(l-lactic acid)
Wang, Y., & Mano, J. F. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.04.030 · Cited by 113
Dedieu, I., Peyron, S., Gontard, N., & Aouf, C. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107620 · Cited by 84
Metadata
- Authors
- Yasuniwa, M., & Satou, T.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2002-09-10
- Volume
- 40
- Issue
- 21
- Pages
- 2411-2420
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2061127345
- Cited by
- 183
- References
- 0
- FWCI
- 5.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Multiple melting behavior of poly(butylene succinate). I. Thermal analysis of melt‐crystallized samples. https://app.cochat.ai/papers/10.1002/polb.10298
- The paper
- Yasuniwa, M., & Satou, T. (2002). Multiple melting behavior of poly(butylene succinate). I. Thermal analysis of melt‐crystallized samples. Journal of Polymer Science Part B: Polymer Physics. https://doi.org/10.1002/polb.10298
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.