Influence of structural and morphological factors on the mechanical properties of the polyethylenes
The DOI matches its Crossref record; the references it cites are not checked yet.
Abstract
Force‐length relations at ambient temperature have been determined for a set of polyethylenes which represent a wide range in molecular weight and molecular constitution. Taking advantage of previous work from this laboratory, samples have been prepared in such a manner that the important independent structural variables can be identified and isolated and their influence on the different aspects of the deformation process assessed. Partial melting‐recrystallization processes appear to play an important role. For the linear polymers there is a direct influence of molecular weight. The influence of molecular weight manifests itself in the structure of the interlamellar zone which has a major influence on the initial modulus as well as the ultimate properties. Copolymers and branched copolymers display quite different behavior. The most striking difference is the invariance of the ultimate properties with molecular weight, branching, and level of crystallinity. From the set of experimental results that are presented the molecular factors involved in the deformation process can be sorted out. It becomes quite evident that all of the basic structural regions, characteristic of semicrystalline polymers, contribute to the observations. Focus solely on the changes in the crystallite, in analogy to the deformation of small‐molecule crystalline systems, is inadequate in the case of crystalline polymers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“According to Popli and Mandelkern [32], for degrees of crystallinity less than 25%, the moduli remain constant at approximately 20 MPa.”
Citations
The citation lists are queued
They are fetched later and appear here then.
References 115 · Cited by 361
Research works printed but not linked: 19
- 1983, Mechanical Properties of Solid Polymers
- Ward I. M., 1977, Ultra‐High Modulus Polymers
- Ichihara S., 1983, The Strength and Stiffness of Polymers, 129
- Steidl J., 1972, J. Polym. Sci., 38, 345
- Samuels R. J., 1974, Structure and Polymer Properties
- 10.1007/BF01465438 · DOI · Paper page
- 10.1007/BF00540553 · DOI · Paper page
- 10.1007/BF00265262 · DOI
- 10.1021/j150670a022 · DOI · Paper page
- 10.1007/978-1-4899-3178-8 · doi:10.1007/978-1-4899-3178-8
- Nielsen L. E., 1963, J. Polym. Sci., 1, 1945
- Krigbaum W. R., 1966, J. Polym. Sci., 15, 2511
- 10.1007/978-1-4899-3178-8 · doi:10.1007/978-1-4899-3178-8
- Takayanagi M., 1964, J. Polym. Sci., 5, 113
- Takayanagi M., 1966, J. Polym. Sci., 15, 263
- M.Takayanagiin Proceedings of the Fourth International Congress on Rheology Pt. I. E. H. Lee and A. L. Copley Eds. Wiley New York 1965.
- Sakurada I., 1966, J. Polym. Sci., 15, 75
- Marikkin V. A., 1977, J. Polym. Sci., 58, 97
- Wignall G. D., 1983, Polymer Commun., 24, 354
Metadata
- Authors
- Popli, R., & Mandelkern, L.
- Affiliations
- Florida State University (US)
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 1987-03
- Volume
- 25
- Issue
- 3
- Pages
- 441-483
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W1991170801
- Semantic Scholar
- 204d8ef30d5eb91f220bb8221c7bacbeeedf2d1d
- Cited by
- 361
- References
- 115
- Citations by year
- 2026: 14 · 2025: 6 · 2024: 7 · 2023: 11 · 2022: 8 · 2021: 4 · 2020: 11 · 2019: 9 · 2018: 8 · 2017: 6 · 2016: 8 · 2015: 8 · 2014: 14 · 2013: 17 · 2012: 11
- FWCI
- 8.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Polymer Science Part B Polymer Physics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
- Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
- Keywords
- polyethylene, force-length relation, molecular weight effects, molecular constitution, copolymers, branched copolymers, crystallinity, melting and recrystallization, semicrystalline polymers, deformation mechanisms, initial modulus
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of structural and morphological factors on the mechanical properties of the polyethylenes. https://app.cochat.ai/papers/10.1002/polb.1987.090250301
- The paper
- Popli, R., & Mandelkern, L. (1987). Influence of structural and morphological factors on the mechanical properties of the polyethylenes. Journal of Polymer Science Part B: Polymer Physics. https://doi.org/10.1002/polb.1987.090250301
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.