Tunable microstructures and mechanical deformation in transparent poly(urethane urea)s
The DOI matches its Crossref record.
Abstract
Transparent poly(urethane urea) (TPUU) materials offer an avenue to enable material designs with potential to achieve simultaneous enhancements in both physical and mechanical properties. To optimize the performance required for each application, the molecular features that influence the microstructure, the glass transition temperature (Tg), the deformation mechanisms, and the mechanical deformation behavior must be understood and exploited. In this work, a comprehensive materials characterization of select model PUUs with tunable microstructures is addressed. Increasing the hard segment (HS) content increases the stiffness and flow stress levels, whereas altering the soft segment (SS) molecular weight from 2000 to 1000 g/mol leads to an enhanced phase mixing with a SS Tg shifted ∼17 °K toward higher temperatures as well as broadening of the SS relaxation closer to room temperature. As a result, the 1K TPUU materials display greater rate‐dependent stiffening and strain hardening on mechanical deformation over the broad range of strain rates covered in this work (10−3 to 10 4 s−1). In such case of similar urea‐based HS content, the molar content of the urethane linkages, per stoichiometric requirements, is much higher in the 1K TPUUs than the 2K TPUUs. These additional urethane moieties lead to an increase in the extent of intermolecular interactions, via hydrogen bonding between the HS and the SS, providing not only further phase mixing and stronger rate sensitivity but also provide 1K TPUUs with drastically improved barrier properties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The structure, microphase-separated morphology, and property of polyurethanes and polyureas
He, Y., Xie, D., & Zhang, X. (2014) · Journal of Materials Science · doi:10.1007/s10853-014-8458-y · Cited by 289
High strain rate deformation of layered nanocomposites
Lee, J.-H., Veysset, D., Singer, J. P., Retsch, M., Saini, G., Pezeril, T., Nelson, K. A., & Thomas, E. L. (2012) · Nature Communications · doi:10.1038/ncomms2166 · Cited by 239
Castagna, A. M., Pangon, A., Choi, T., Dillon, G. P., & Runt, J. (2012) · Macromolecules · doi:10.1021/ma3016568 · Cited by 166
Dynamics of supersonic microparticle impact on elastomers revealed by real–time multi–frame imaging
Veysset, D., Hsieh, A. J., Kooi, S., Maznev, A. A., Masser, K. A., & Nelson, K. A. (2016) · Scientific Reports · doi:10.1038/srep25577 · Cited by 100
Self-citationSun, Y., Wu, Y.-C. M., Veysset, D., Kooi, S. E., Hu, W., Swager, T. M., Nelson, K. A., & Hsieh, A. J. (2019) · Applied Physics Letters · doi:10.1063/1.5111964 · Cited by 45
Self-citation
Metadata
- Authors
- Rinaldi, R. G., Hsieh, A. J., & Boyce, M. C.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2010-11-08
- Volume
- 49
- Issue
- 2
- Pages
- 123-135
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2048361991
- Cited by
- 47
- References
- 0
- FWCI
- 3.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Tunable microstructures and mechanical deformation in transparent poly(urethane urea)s. https://app.cochat.ai/papers/10.1002/polb.22128
- The paper
- Rinaldi, R. G., Hsieh, A. J., & Boyce, M. C. (2011). Tunable microstructures and mechanical deformation in transparent poly(urethane urea)s. Journal of Polymer Science Part B: Polymer Physics. https://doi.org/10.1002/polb.22128
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.