The DOI matches its Crossref record.
Effects of Reactor Packing Materials on H2 Production by CO2 Reforming of CH4 in a Dielectric Barrier Discharge
Open accessAbstract
Non‐thermal plasma has been investigated for CO 2 reforming of CH 4 in a coaxial DBD reactor with different reactor packing materials placed into the discharge gap. Both the chemical and physical effects on reaction performance have been examined for the addition of quartz wool, γ‐Al 2 O 3 and zeolite 3A, in order to gain a better understanding of plasma interactions with materials during CH 4 reforming reactions. Quartz wool was found to enhance the conversion of CH 4 and improve H 2 yields as a result of changes in the physical properties of the discharge; electrical measurements showed an increase in the intensity of microdischarge filaments over quartz wool. In the presence of Al 2 O 3 and zeolite 3A, the discharge intensity was reduced and consequently CH 4 and CO 2 conversions were lower for these materials. However, in the presence of zeolite 3A improved selectivities towards H 2 and light hydrocarbons acetylene/ethylene were obtained and formation of liquid hydrocarbons was inhibited due to shape‐selectivity determined by the zeolite pore size.magnified image
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Plasma technology – a novel solution for CO2 conversion?
Snoeckx, R., & Bogaerts, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00066e · Cited by 1,268
A Review of Non-Thermal Plasma Technology: A novel solution for CO2 conversion and utilization
George, A., Shen, B., Craven, M., Wang, Y., Kang, D., Wu, C., & Tu, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109702 · Cited by 497
Self-citationTransformation technologies for CO2 utilisation: Current status, challenges and future prospects
Kamkeng, A. D. N., Wang, M., Hu, J., Du, W., & Qian, F. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.128138 · Cited by 475
Grim, R. G., Huang, Z., Guarnieri, M. T., Ferrell, J. R., Tao, L., & Schaidle, J. A. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02410g · Cited by 454
Mei, D., Zhu, X., He, Y.-L., Yan, J. D., & Tu, X. (2014) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/24/1/015011 · Cited by 380
Self-citationTu, X., & Whitehead, J. C. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.04.073 · Cited by 361
Self-citationThe application of dielectric barrier discharge non-thermal plasma in VOCs abatement: A review
Li, S., Dang, X., Yu, X., Abbas, G., Zhang, Q., & Cao, L. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124275 · Cited by 356
Catalysis Enabled by Plasma Activation of Strong Chemical Bonds: A Review
Mehta, P., Barboun, P., Go, D. B., Hicks, J. C., & Schneider, W. F. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00263 · Cited by 346
Understanding plasma catalysis through modelling and simulation—a review
Neyts, E. C., & Bogaerts, A. (2014) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/47/22/224010 · Cited by 342
Metadata
- Authors
- Gallon, H. J., Tu, X., & Whitehead, J. C.
- Venue
- Plasma Processes and Polymers
- Publisher
- Wiley
- Published
- 2011-11-03
- Volume
- 9
- Issue
- 1
- Pages
- 90-97
- ISSN
- 1612-8850 (ISSN-L)
- 1612-8869
- OpenAlex
- W2054929841
- Cited by
- 158
- References
- 0
- FWCI
- 3.10
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.